SmartNode 4114 gateway configuration problem

[giannilp]

Hi, I just configured smarnode 4114 as support page said, but it don't send a registration request to 3CX. ... the links are good and the gateway reach the 3CX server.

here is the patton config:

context ip router

interface eth0
ipaddress 192.168.1.4 255.255.255.0
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu

context ip router
route 0.0.0.0 0.0.0.0 192.168.1.1 0

context cs switch

interface sip SIP-IF
bind gateway 3cxpbx
service default
route call dest-interface fxo-00

interface fxo fxo-00
route call dest-interface SIP-IF

context cs switch
no shutdown

gateway sip 3cxpbx
bind interface eth0 router

service default
domain 192.168.1.195
authentication 30002 password iQAbdwbb86U= encrypted
default-server 192.168.1.195 5060 loose-router
registration-lifetime 1200
registrar 192.168.1.195

gateway sip 3cxpbx
no shutdown

port ethernet 0 0
medium auto
encapsulation ip
bind interface eth0 router
no shutdown

port fxo 0 0
encapsulation cc-fxo
bind interface fxo-00 switch
no shutdown

thanks for any suggestion
Gianni

 

[3CXsupport]

Hi please review the FAQ http://www.3cx.com/support/patton-smartnode.html to configure the smartnode.

This is one of the hardest devices to configure and understand but it is a really well behaved device. You are going to require patience, but in the end it will pay off.