spa 3102 beep beep beep

[Federation(NL)]

Hello i am new to this forum.

I have spend a lot of time on the 3cx phone system and i must say i am impressed with the software.

But i have a little problem wich i cant seem to find the answer for. I searched the forum and on google and couldnt find an answer.
Here is my problem:

i have trying to call out through my land line. i made a outbound rule
wich reads that all numbers starting with a 0 use this rule. a stripped 0 digits and prepend nothing.

route 1 is set to my landline wich i have connected in an spa 3102 from linksys.

Now incoming calls and all work just fine but when i try to call out i get a short dial tone and then only beep beep beep < pause > beep beep beep.
and after 3 or 4 times the line closes.

How can i resolve this. If anyone has a suggestion or needs more info please let me now.

this is what is in my logs:

01:04:27.421 StunClient:rocess [CM506003]: Resolved SIP external IPort has changed to (85.145.235.89:50011) on Transport 10.0.0.4:5060
01:04:27.281 StunClient:nInitTests [CM506001]: STUN request to resolve SIP external IPort mapping is sent to STUN server 75.101.138.128:3478 over Transport 10.0.0.4:5060
01:01:04.312 ExtnCfg::updateContact [CM504002]: Ext.150: a contact is unregistered. Contact(s): [sip:[email protected]:5061/150]
00:57:18.265 Call::Terminate [CM503008]: Call(52): Call is terminated
00:57:18.265 Call::Terminate [CM503008]: Call(52): Call is terminated
00:56:58.156 CallCtrl:nLegConnected [CM503007]: Call(52): Device joined: sip:[email protected]:5060
00:56:58.156 CallCtrl:nLegConnected [CM503007]: Call(52): Device joined: sip:[email protected]
00:56:58.156 Line:rintEndpointInfo [CM505002]: Gateway:[orange] Device info: Device Not Identified: User Agent not matched; Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [] Transport: [sip:10.0.0.4:5060]
00:56:58.156 CallCtrl:nAnsweredCall [CM503002]: Call(52): Alerting sip:[email protected]:5060
00:56:58.062 CallCtrl:nSelectRouteReq [CM503004]: Call(52): Calling: PSTNline:0621688316@(Ln.10000@orange)@[Dev:sip:[email protected]:5060]
00:56:58.046 CallCtrl:nSelectRouteReq [CM503010]: Making route(s) to [sip:[email protected]:5060]
00:56:58.046 Extension:rintEndpointInfo [CM505001]: Ext.101: Device info: Device Identified: [Man: SJ Labs;Mod: SJ Phone;Rev: 1.60] Capabilities:[reinvite, no-replaces, able-no-sdp, no-recvonly] UserAgent: [SJphone/1.60.303c (SJ Labs)] Transport: [sip:10.0.0.4:5060]
00:56:58.031 CallCtrl:nIncomingCall [CM503001]: Call(52): Incoming call from Ext.101 to [sip:[email protected]:5060]

 

[galal202]

Hello and welcome,
Try port 5061 on pstn line and 3cx server

 

[Federation(NL)]

Hello,

Thanx for the quick reply.

Tried it but this doesn`t seem to work
Also if i set pstn line to 5061 it wil conflict with line 1 wich is already on 5061

If i set both 3cx and and pstn line to 5061 the line registers but it gives be the exact same problem as i am having now.
it gives a shot dial tone wich indicates to me that the outside line is being used ( in 3cx line status the outside line is becoming orange when dialing a number ) but after the short dial tone it gives me beep beep beep < pause > beep beep beep and after 3 or 4 times the line hangs up.

 

[Federation(NL)]

anybody?

 

[galal202]

Hello,
I'm sorry I did not see your reply

please reset to factory set then read this topic
http://www.3cx.com/forums/unable-to-configure-linksys-7530.html

 

[Federation(NL)]

Hello,

sorry didnt see youre reply either.
I will try this will report back to you asap.

 

[milauria]

I made it setting 5062 on PSTN and 3CX ... hope it helps

 

[Federation(NL)]

Hello,

I have tried the suggestions in the post you send me.
When i call out now i dont get beep beep beep anymore but also no dial tone.

Also Milauria tried youre suggestion but it doesnt work

 

[galal202]

Hello,
I just did reset for 4 devices
this is the settings

First in 3CX Spa3102 settings change fxo pstn Gateway port to 5061


Hard ware Version must be updated to 5.1.7(GW)
From linksys site

dial **** to enter configuration menu
dial 73738# to reset to factory set
dial 1 to confirm
Hangup (will restart)

unplug pstn line now
dial **** to enter configuration menu
dial 110# to know your web IP

to enable web control
dial 7932# option 1 then 1 to save
plug pstn line now

click admin/advanced
Click ROUTER/WAN SETUP

Internet Connection Settings
Change Connection Type: to static ip


Static IP Settings
: set your network parameters Static IP:,NetMask:,Gateway

set dns provided from your ISP
set ntp to ntp server (option)

in pstn LINE

SIP Settings
leave SIP Port:5061 as it

Proxy and Registration
proxy:your server ip
register expires:300

Subscriber Information
set user id and password

Audio Configuration
Preferred Codec: g729

Dial Plans
Dial Plan 8: (S0<:xxxxx>)
which xxxxx= 3cx virtual number


PSTN-To-VoIP Gateway Setup
PSTN Ring Thru Line 1:No
PSTN CID Number Prefixption
PSTN CID For VoIP CID: yes
PSTN Caller Default DP: 8


FXO Timer Values (sec)
PSTN Answer Delay:From 4 to 6

PSTN Disconnect Detection
Detect PSTN Long Silence
PSTN Long Silence Duration:300

International Control
Line-In-Use Voltage: 10
SPA To PSTN Gain: 15
PSTN To SPA Gain: 15


In LINE1

Proxy and Registration
proxy
register expires:300

Subscriber Information
set user id and password

Audio Configuration
Preferred Codec: g729

Option to connect from remote to 3cx server

In VOICE/SIp
NAT Support Parameters

STUN Enable: yes
STUN Server: stun.fwdnet.net

In pstn line
Nat settings
NAT Mapping Enable: yes

In Line 1
Nat settings