SPA-3102 Fix

[sigma1]

Not too long ago I was browsing for a solution to why the 3102 doesn't pass the caller ID. I saw everything from increasing this time to the other thing.

Here's the solution (replace template)

 

[leejor]

In North America this value really needs to be a "3" or above to collect the CID info. Otherwise the 3102 doesn't wait long enough before sending the call info on to 3CX.
I'm assuming that this provisions the 3102 with a "0"

<PSTN_Answer_Delay_2_ ua="na">0</PSTN_Answer_Delay_2_>



And this (yes) sends incoming PSTN calls through to the FXS jack, which is fine if you don't want to use the 3102 as a 3CX trunk.

<PSTN_Ring_Thru_Line_1_2_ ua="na">Yes</PSTN_Ring_Thru_Line_1_2_>