what u are doign is great and i know that it is a lot of work, so i listed the issues which i found with the latest firmware:
i registered extention 100 on PAP2
i registered extention 101 on fritz ox fon
i registered a voip provider account under "add voip"
all account are showing green meaning they are registering. here are the issues i could see:
1- calling from 100 to 101 result to 101 hearing what 100 is saying but 100 cannot hear what 101 is saying.
2- when calling from 101 to 100, u hear a ringback but in reality the phone does not ring and nothing under "line status" show that the 100 is ringing.
3- i registered in this case another extention called 102 on 3cx and and on PAP2 line2. and when calling from line1 to line2 by dialing 102 i hear a ringback but no physicall ringing on the handset connected to line2 od PAP2.
i came to the conclusion that it was an issue from the fritz
the next test is makign calls using a voip account which i did register on 3cx and it was indeed registered as i can see the green light on the "line status"
1- i dialed a PSTN number from extention 100 which is registered on line1 of PAP2 using
a- fitst i heard an internal ringback and not the actual ringback abd normally i dont like it because sometime the called numer might be engaged and u would no know that so u will continue hearing a ringback thinking that the other person is not answering but rather he is engaged.
b- when i picked the phone, no audio both ways, meaning i cannot hear the person i called and he cannot hear me either.
c- i did played around the outbound rules and i had the same problem
i guess these were hew of my problems, i would appreciate if someone can advise on that or can correct me if anything was wrongly made from my side
thanks
i registered extention 100 on PAP2
i registered extention 101 on fritz ox fon
i registered a voip provider account under "add voip"
all account are showing green meaning they are registering. here are the issues i could see:
1- calling from 100 to 101 result to 101 hearing what 100 is saying but 100 cannot hear what 101 is saying.
2- when calling from 101 to 100, u hear a ringback but in reality the phone does not ring and nothing under "line status" show that the 100 is ringing.
3- i registered in this case another extention called 102 on 3cx and and on PAP2 line2. and when calling from line1 to line2 by dialing 102 i hear a ringback but no physicall ringing on the handset connected to line2 od PAP2.
i came to the conclusion that it was an issue from the fritz
the next test is makign calls using a voip account which i did register on 3cx and it was indeed registered as i can see the green light on the "line status"
1- i dialed a PSTN number from extention 100 which is registered on line1 of PAP2 using
a- fitst i heard an internal ringback and not the actual ringback abd normally i dont like it because sometime the called numer might be engaged and u would no know that so u will continue hearing a ringback thinking that the other person is not answering but rather he is engaged.
b- when i picked the phone, no audio both ways, meaning i cannot hear the person i called and he cannot hear me either.
c- i did played around the outbound rules and i had the same problem
i guess these were hew of my problems, i would appreciate if someone can advise on that or can correct me if anything was wrongly made from my side
thanks
