The ability to just enable/disable 1 SIP trunk only, not all trunks

[networknotifications@mortgagehouse]

Is it possible to just enable/disable 1 SIP trunk only (not the whole lot)?

If not can this be added to a feature request as this is silly that you have to enable/disable ALL trunks, as sometimes you need to test links on different boxes (production and staging) and you need the same links on both but only want to enable/disable them when performing testing and you don't want to keep having to add/remove them all the time

 

[jcostlow]

You can edit the trunk you want to disable, go to options and unchecked allow inbound and allow uutbound calls.

 

[networknotifications@mortgagehouse]

I know I can edit the trunk but I want to be able to enable or disabel the trunk in the CORRECT location IE the SIP Trunks page

 

[YiannisH_3CX]

I know I can edit the trunk but I want to be able to enable or disabel the trunk in the CORRECT location IE the SIP Trunks page

The disable button disables the 2 options suggested by @jcostlow so that is the correct way of disabling one trunk.


I know there is no dedicated button in the SIP trunks page but to disable one trunk its just 4 clicks so still better than having to delete the trunk and recreate it for testing.