Hi All,
I'm trying to configure a VOIP provider here in the UK. The provider is Timico and we already have a VOIP account with them wish we are under contract with for another 2 years (whoever signed that tie-in should be shot!!!) so changing is not an option I'm afraid. Below is the guide we have for connectiong a linksys ATA - hopefully this has all the information we require.
Setting up a Linksys ATA
Leave all option as factory defaults, just change the following.
Line Tab(s)
------------------------------------------------------------
NAT Keep Alive Msg: $PING
NAT Keep Alive Enable: Yes
SIP Proxy-Require: com.nortelnetworks.firewall
SIP Remote-Party-ID: Yes
Proxy: <YOUR DOMAIN>
Outbound Proxy: 195.54.255.8
Use Outbound Proxy: Yes
Register Expires: 60
Display Name: <YOUR USERNAME>
User ID: <YOUR USERNAME>
Password: <YOUR PASSWORD>
Auth ID: <YOUR USERNAME>
Preferred Codec: G729a
SIP Tab
------------------------------------------------------------
DTMF Relay MIME Type: application/vnd.nortelnetworks.digits
Reg Retry Intvl: 1
Reg Retry Long Intvl: 30
RTP Port Min: 40000
RTP Port Max: 60,000
RTP Packet Size: 0.020
NAT Keep Alive Intvl: 5
REGIONAL Tab
------------------------------------------------------------
Control Timer Values
Interdigit Long Timer: 3
Interdigit Short Timer: 1
Time Zone: GMT
I have configured the following settings in 3CX:
SIP Server hostname: 195.54.255.8
SIP server port: 5060
Outbound proxy: 195.54.255.8
Outbound proxy port: 5060
Unfortunately this does not work, the error in the server activity log is:
09:18:48.628 [CM504005]: Registration failed for: 10001@Timico; Cause: 403 Forbidden; from IP:195.54.255.8:5060
I'm certain the details I've entered are correct but unfortunately it just won't register. I'm a bit stumped now and if anyone has any ideas I would be most grateful.
Many Thanks,
Dave
I'm trying to configure a VOIP provider here in the UK. The provider is Timico and we already have a VOIP account with them wish we are under contract with for another 2 years (whoever signed that tie-in should be shot!!!) so changing is not an option I'm afraid. Below is the guide we have for connectiong a linksys ATA - hopefully this has all the information we require.
Setting up a Linksys ATA
Leave all option as factory defaults, just change the following.
Line Tab(s)
------------------------------------------------------------
NAT Keep Alive Msg: $PING
NAT Keep Alive Enable: Yes
SIP Proxy-Require: com.nortelnetworks.firewall
SIP Remote-Party-ID: Yes
Proxy: <YOUR DOMAIN>
Outbound Proxy: 195.54.255.8
Use Outbound Proxy: Yes
Register Expires: 60
Display Name: <YOUR USERNAME>
User ID: <YOUR USERNAME>
Password: <YOUR PASSWORD>
Auth ID: <YOUR USERNAME>
Preferred Codec: G729a
SIP Tab
------------------------------------------------------------
DTMF Relay MIME Type: application/vnd.nortelnetworks.digits
Reg Retry Intvl: 1
Reg Retry Long Intvl: 30
RTP Port Min: 40000
RTP Port Max: 60,000
RTP Packet Size: 0.020
NAT Keep Alive Intvl: 5
REGIONAL Tab
------------------------------------------------------------
Control Timer Values
Interdigit Long Timer: 3
Interdigit Short Timer: 1
Time Zone: GMT
I have configured the following settings in 3CX:
SIP Server hostname: 195.54.255.8
SIP server port: 5060
Outbound proxy: 195.54.255.8
Outbound proxy port: 5060
Unfortunately this does not work, the error in the server activity log is:
09:18:48.628 [CM504005]: Registration failed for: 10001@Timico; Cause: 403 Forbidden; from IP:195.54.255.8:5060
I'm certain the details I've entered are correct but unfortunately it just won't register. I'm a bit stumped now and if anyone has any ideas I would be most grateful.
Many Thanks,
Dave
