Trunk re-register timeout not working

anonymouse

Bronze Partner
Joined
Apr 28, 2019
Messages
51
Reaction score
19
A trunk is configured with 126 seconds as the re-register timeout but it doesn't re-register until I manually select "Refresh registration".

I have had this happen a few times already with two different trunks on separate occasions.

I'd appreciate any help.

1771939458494.png
 
Solution
A trunk is configured with 126 seconds as the re-register timeout but it doesn't re-register until I manually select "Refresh registration".
The value in the trunks settings is a suggestion when the PBX acts like a client and registers to a provider. The provider will decide the actual re-registration timeout in the 200 OK sent to the PBX for the registration.
Check what the provider actually supports and what they reply to the PBX using a pcap so you can determine if the PBX tries to re-register on time.
Hello,

What is the trunk provider, and have you reached out to them to confirm what they support for re-registration?
 
  • Like
Reactions: bitn2
A trunk is configured with 126 seconds as the re-register timeout but it doesn't re-register until I manually select "Refresh registration".
The value in the trunks settings is a suggestion when the PBX acts like a client and registers to a provider. The provider will decide the actual re-registration timeout in the 200 OK sent to the PBX for the registration.
Check what the provider actually supports and what they reply to the PBX using a pcap so you can determine if the PBX tries to re-register on time.
 
Solution

Forum statistics

Threads
112,503
Messages
592,890
Members
165,722
Latest member
Diogo Maia