- Joined
- May 18, 2012
- Messages
- 4
- Reaction score
- 0
Device Info
-------------------------------------------------------
Phone Model: [Samsung Galaxy S]
Firmware Version: [Darky Rom 10.2 (Gingerbread)]
Issue Info
-------------------------------------------------------
Handset: [Phone]
Contacts: [N/A]
Connection: [Any connection]
Server: [internal]
Hi to all, we're running in to problems with voice calls to 3CX soft-phones on our AsteriskNOW FreePBX installation, running Asterisk 1.8
We have the 3CX soft-phone software (1.3.4 on Android, 1.1.5 on iphone) and when the software makes or receives the first call, it's perfectly OK. When the phone's user tries to make or receive subsequent calls, there is either no audio or one way audio. This makes no difference if the soft-phone devices are on the same LAN or across the country.
Not sure if it makes a difference, but the 3CX soft-phone for Windows is working fine, it seems to be just the handheld devices, and it matters not whether they are connected to the same LAN or connecting via the mobile network.
Any advice on what may be causing this would be appreciated - to say it's frustrating having to re-boot the software after each call is an under-statement.
Thanks in advance
PG
-------------------------------------------------------
Phone Model: [Samsung Galaxy S]
Firmware Version: [Darky Rom 10.2 (Gingerbread)]
Issue Info
-------------------------------------------------------
Handset: [Phone]
Contacts: [N/A]
Connection: [Any connection]
Server: [internal]
Hi to all, we're running in to problems with voice calls to 3CX soft-phones on our AsteriskNOW FreePBX installation, running Asterisk 1.8
We have the 3CX soft-phone software (1.3.4 on Android, 1.1.5 on iphone) and when the software makes or receives the first call, it's perfectly OK. When the phone's user tries to make or receive subsequent calls, there is either no audio or one way audio. This makes no difference if the soft-phone devices are on the same LAN or across the country.
Not sure if it makes a difference, but the 3CX soft-phone for Windows is working fine, it seems to be just the handheld devices, and it matters not whether they are connected to the same LAN or connecting via the mobile network.
Any advice on what may be causing this would be appreciated - to say it's frustrating having to re-boot the software after each call is an under-statement.
Thanks in advance
PG