Etisalat SIP Line Configuration

[lsuae-johnm]

Setup:
3CX V20 Debian software installed on the cloud
SIP Trunk Line is physically installed on-premises
PC with 2 Ethernet ports (available to install 3CX Free License and configure the SIP line)

Can we install a 3CX Free license on the pc to configure the physical SIP trunk line to 1 of the Ethernet ports and 1 Ethernet port for the internet connection to be able to push or bridge the SIP line to the cloud 3CX V20 server? If this is not possible, can anyone suggest any other option?

 

[Alejandro_3CX]

Setup:
3CX V20 Debian software installed on the cloud
SIP Trunk Line is physically installed on-premises
PC with 2 Ethernet ports (available to install 3CX Free License and configure the SIP line)

Can we install a 3CX Free license on the pc to configure the physical SIP trunk line to 1 of the Ethernet ports and 1 Ethernet port for the internet connection to be able to push or bridge the SIP line to the cloud 3CX V20 server? If this is not possible, can anyone suggest any other option?

Please note that the BRIDGE feature is available using a PRO or AI version, this is not available in the Basic neither free versions.

If you have a physical sip trunk line then you need to use the PBX on premise, otherwise get a cloud provider that offers you a sip trunk for your cloud deployment.

Have a good day!

 

[NikosT_3CX]

@lsuae-johnm I would recommend checking the guide below and specifically the section
on the bottom where it says " Multiple internet gateways (used by ISPs that offer VoIP Services) " .
You will see an example with 2 NICs on the machine and what you have to do on your side for the PBX On Premises.
If the VoIP Provider can not offer Cloud Services then your option is to install the PBX On Premise.
Check here :

https://www.3cx.com/blog/docs/network-configurations-supported-3cx-phone-system/

 

[lsuae-johnm]

Thank you sharing, I will test this one out, and share an update