paging

  1. asm-roc

    [Feature Request] Page Groups

    I've been using 3CX for a few months, and it's been working pretty well for the most part, and we are mostly happy with it. The only area where it could improve would be changing the paging behaviour. Currently, when someone makes a page, it shows the PG405, which I assume stands for...
    • asm-roc
    • Thread
    • group paging paging paging all paging dial code paging groups paging system
    • Replies: 1
    • Forum: 4SC
  2. asm-roc

    Paging

    I recently starting using paging and was wondering if it's possible to change the caller id on it? Right now when someone dials the page group it goes to all extensions but says PG415 which is the extension number for that page group. Is it possible to make it show the person's name as the...
    • asm-roc
    • Thread
    • paging paging all paging groups
    • Replies: 2
    • Forum: 4SC

  3. 3CX V20 Paging Issues at multiple clients

    I've had several companies report back to me that paging has been problematic or non-functional since their upgrades from V18 to V20. It appears the only companies that have complained have been companies that had a different dial code for paging than *8. I've attempted at these companies to...

  4. Paging Ring Group Beep - Prompt Set

    Hello! I'm trying to switch which prompt set a specific Paging Ring Group uses. I'm trying to lower the volume of the Beep which is a sound in the prompts. I've created a separate prompt set with the quiet beep and I've confirmed by setting an extension's voicemail to use that prompt set that...
  5. JohnWoodCC

    Multicast to just a particular location

    We are a community college with our main campus, along with four other sites. Our Campus Police came to me a while back to see if it was possible to use the phones as a paging system to use for emergency use. I said the phones could do that, but would need to look at how it would be configured...
    • JohnWoodCC
    • Thread
    • multicast paging version 20
    • Replies: 5
    • Forum: Yealink

  6. Paging - Built In

    We are currently using the built in Paging Ring Group with the intention of notifying employees if/when there is a building emergency. The idea is it will never/rarely ever get used, but for safety reasons, feel it is important. The ring group works exactly as intended with a few caveats I was...

  7. Paging Question

    Hello, I have a customer who we just set up a Fanvil PA2 for their paging system and it's working beautifully. However, they want to also page all their deskphones at the same time. What is the best method for them to be able to press one key to page their warehouse + all the deskphones...
  8. JanFilipowski

    Paging group name wrongly displayed on Fanvil IP phones

    My client got 2 Fanvil phones provisioned (V65 as router phone and X3U as normal phone). While calling a paging group linked to extensions they display pg992 (where 992 is paging group extensions number) even though its name is set to ALERT in settings and it is displayed correctly in desktop...

  9. Solved Intercom BLF Custom Speeddial not working

    Upgraded fromv18 to v20. The dial code for intercom/paging is *4 When *4+extension is dialed the phone only rings and does not automatically answer like it did in v18. Any thoughts?

  10. Automatic scheduled multicast paging

    Our production floor is moving to scheduled department break times so nobody can complain about certain people taking more time off than others. The production manager wants me to *quickly* implement some sort of automated chime or tone from our massive Algo SIP horn speakers (...
  11. rbergthold

    Solved paging & Panel view not working after upgrade to version 20

    i updated this system to Version 20 last night. i have two issues. 1) *9 + extension for intercom (paging) users is not working like it was prior to upgrade. It's just ringing the extension 2) user says that the only active call they can see in the Panel is their active call.

  12. Paging not working on phones who also have the Windows Computer client software running

    All across our 50 or so phones, *11ext works for paging people...until we installed the Windows software so a few of our users can use webchat. When calling those users, they hear a quick Beep Beep, and it goes dead. As soon as they quit the windows client, the paging works as expected. I've...
    • JPoro
    • Thread
    • client for windows fanvilx5u paging
    • Replies: 13
    • Forum: Windows
  13. kinetix

    Paging Group "INTRO TONE"

    Currently when using PAGING GROUPS, there is an INTRO TONE that "announces" the incoming page. Would like to see this as a configurable option within th Provisioning Section of the (YEALINK Phone Setup. We can do this with a Custom Template, but in a 3CX Hosted Environment, obviously Custom...

  14. Two questions: Call routing and notification configuration

    I have a hosted 3cx instance, and the way the client wanted voicemail was to have just one general inbox. The question is, how can I have the notification email sent to multiple users? There are a few office assistants that would possibly be checking this. Second question is, we have a PageAll...

  15. New Fanvil PA3 Deployment, First Time Using PA3

    I am attempting to setup a Fanvil PA3 with 3cx that is hosted on a cloud server. I have been Googling and reaching out to Fanvil, but still not quite sure how this is supposed to work. Any help would be greatly appreciated! I am replacing a Valcom V-2001A analog system with the PA3 to use...
    • DuvanCNR
    • Thread
    • fanvil pa3 help intercom music music on hold new new install paging paging adapter paging system
    • Replies: 9
    • Forum: Fanvil

  16. Delayed paging feature / workaround or fixing feedback loops? (store & forward method without external hardware)

    Hello, I've searched for this and haven't found what I am looking for so this may need to be under feature requests. Found plenty "delay issues" with paging but this isn't an issue as much as I am looking for an alternate method to perform a function. Normally when a client wants paging to...

  17. Bogen MultiVoIP paging modules

    Good afternoon! We're speccing out a replacement for a customer phone system. They have some Bogen network paging modules that we'd like to keep.Most are model MVP130BG, or very similar devices. Has anyone had good / bad / indifferent results with integrating these into a 3CX system? Thanks...
    • ghughesitx
    • Thread
    • paging paging internal/external
    • Replies: 2
    • Forum: Other

  18. GSC3510 - Multiple Multicast Paging Groups

    Hello! I am trying to add multiple multicast paging groups for many GSC3510 and 3505 intercoms. The template shows each of the multicast listening positions available in the GSC3510 GUI, but I can only see a way to configure one of them in the phone provisioning step. If I try to configure...
    • cradmin
    • Thread
    • multicast paging
    • Replies: 1
    • Forum: Other

  19. Unsupported Cisco CP-8851 AutoAnswer with 3CX

    I'm trying to get Cisco AutoAnswer working. I'm looking for a method to, when a phone receives a call from a specific extension, automatically answers it with the speakerphone. The Cisco Cp-8851 is on extension 1000. The paging extension, or the extension I want to have it to automatically...
    • brnan
    • Thread
    • cisco cisco 8851 paging
    • Replies: 0
    • Forum: Other

  20. Solved PA3 and paging

    I just installed a PA3 to do paging on intercoms in my company. the goal is to make a post # on my phones and that the message is broadcast on the intercoms. Fanvil tells me it's 3cx compatible and yet I can't assign it a position. can you help me?
    • Icedmelan
    • Thread
    • 3cx fanvil pa3 paging
    • Replies: 6
    • Forum: Fanvil
3CX Logo Footer Copyright © Sitemap Privacy
Top Bottom