pstn gateway

  1. SIP Trunk(Grandstream GXW-4104) - Shows Red Icon

    I have added the PSTN Gateway of GrandSteam GXW-4104. I am using this VoIP-gateways/grand stream link to set up all the details. I believe all the details entered are correct, yet the icon in the SIP account list shows a Red icon. Looking to find out where I get error information to know what...
    • Nawaz552
    • Thread
    • grandstream 4104 pstn gateway voip provider
    • Replies: 6
    • Forum: Other
  2. Kirsty - Fountain IT

    Unable to make calls with Patton SmartNode 4141 FXO PSTN Gateway

    I have installed a Patton SmartNode 4141 4 Port FXO PSTN Gateway and connected up 3 working PSTN lines to the first 3 ports. Patton firmware has been updated to the latest and I have meticulously followed all the instructions on the 3CX webpage to configure and provision this device. After the...

  3. PSTN E1 PRI Gateway - Patton vs BeroNet

    I am double-minded between beroNet BF16001E1 Box and Patton SN4171/1E30VHP/EUI. Doing a bit of research was able to understand that Patton is robust in CLI which is quite helpful for real-time logging. Would like to know more about personal experiences using both including the cost of each...
    • sysadminmz
    • Thread
    • beronet beronet 16001e1 e1 pri patton patton 4170 pstn gateway tone set
    • Replies: 3
    • Forum: Phone System / PBX
  4. Andriy

    Adding PSTN as SIP Trunk with Patton 4112

    Hello ! I have a PSTN line that I would like to add to 3CX as a Gateway using Patton Smart Node 4112 so that I can use that Analog line as if it was a SIP Trunk in 3CX I have 3CX 15.5 hosted by 3CX (aka 3CX express). Therefore I beleive this solution is not supported, but I have heard that it...

  5. Why does not remote PSTN Gateway work with SBC?

    Hi There, I have 3cx PRO edition 15.5 running at Google Cloud. My remote office has fixed IP and it is running SBC for 8 devices (IP Phones) - SBC on RPi 3 Model B Plus with last version of SBC. All of devices are working properly. I am trying to add a PSTN gateway... but I heard the PSTN...
  6. FirstZero

    Telekom + PSTN Gateway Patton 4120

    HY we are currendly testing 3CX and are using an Patton smart node 4120 for our BRI ISDN line from se Deutsche Telekom. We can get called but we cant make calls. What settings du i have to make to make it running? With greetings FirstZero

  7. Advice setting up 3CX with 2 x PSTN lines

    Hi, I'm looking to setup 3CX with 2 x PSTN telephone lines and need some advice as to the best way to do it. I have: 3CX v15 running on a server (physical box, Debian, free license) 3 x Yealink IP phones (T26p and W52) 1 x Linksys SPA3102 2 x PSTN lines (I'm in the UK, they are from BT) Line 1...

  8. Voip gateway

    Hi, Is there anyone used Yeastar U100 as a voip gateway on 3CXv15. My problem was I cant received any call from U100, but 3CX phone can able to call the local extension on U100 and even used as a PSTN gateway. U100 extension unable to call extension from the 3CX. With this I cant forward all...
3CX Logo Footer Copyright © Sitemap Privacy
Top Bottom