sbc border controller tunnel

  1. chrisbeam

    SBC 18.1.36 do not update to 20.0.100 unless reinstalled

    SBC 18.1.36 do not update to 20.0.100 unless reinstalled: Some of the SBC (Pi 4) Systems are running on v. 18.1.36 and 20.0.100. We tried updating the v. 18.1.36, but found that we eventually had to reinstall the one we tried updating. Is there going to be a way to push an update to an SBC as...

  2. SIP trunk at SBC side

    I need help with configuration of the following scenario Site A: 1) 3CX V20 Installed on Hyper-V, All local IP phones are connected through LAN and Site B IP Phones are connected through 3CX SBC Installed at Site B 2) Site A SIP trunk is delivered by SIP Service provider over private network...

  3. SBC ERR/CRIT Help?

    Hey All, has anyone encountered this before: CRIT | 20240805-204311.010 | 3CX | SBC | 3069146752 | Log.cpp:158 | ====================== 3CX SmartSBC 18.1.80 @ PISBC ====================== CRIT | 20240805-204311.010 | 3CX | SBC | 3069146752 | Log.cpp:159 | Log started: type = file, level = ERR...

  4. SBC Question - Group assignment

    Hey all Just a quick question for all to make sure I haven't missed anything, since the more recent updates we can assign, trunks, ring groups, ivrs, ques and users to specific user group. But I have looked and looked and I can not see the same ability to do this with SBC depolyments or Router...
  5. wars

    3CX SBC disconnecting and reconnecting at least two times an hour... Where do I start?

    Hey all, happy new year! I'm after a bit of advice. I've noticed our SBC is having issues over the past few days (but today it's a problem because previously it was over the weekend with no traffic, now it's a weekday and we are actively using the system). It's been emailing each time it goes...
    • wars
    • Thread
    • 3cx tunnel 3cxtunnel disconnect sbc border controller tunnel sbc issue
    • Replies: 20
    • Forum: Phone System / PBX

  6. Solved SBC down in 3CX server after upgrade from v16 to v18.0.234

    I just upgraded the 3CX server running on W10 from v16.x to v18.0.234. Now I have the next problem: all my SBC connections are down. In one location, I uninstalled the old SBC v16 and installed the new SBC v18, but no success. I suspect that the tunnel do not bring up. All services are runing...
  7. Chris Walters

    3CX SBC in V18

    Have there been any new stress tests of the 3CX SBC in V18? Just curious how accurate this information is after 2 years: https://www.3cx.com/blog/releases/sbc-performance/ Was thinking of using one of the Pi4 B+ with 8GB Ram and 32GB SSD from Canakit. Really what I'm concerned about is...

  8. Solved SBC Controller

    I went to a site today and setup a SBC - the install went great on the debian box and I managed to get to the very end with it connecting to my controller successfully then rebooted On my 3cx console though it still doesn't seem to register - can anyone advise what i'm doing wrong? thanks!
    • chrisjako
    • Thread
    • sbc border controller tunnel
    • Replies: 19
    • Forum: Other

  9. Solved Bridge Configuration or SBCs at Remote Sites

    Hello everyone I am trying to determine pros and cons of setting up 3CX in three locations in a bridged configuration or one system with two SBCs. SBCs have worked well for me in the past, but I don't have any experience bridging systems together. For those with experience, what use cases...

  10. 3CX SBC Headless/Silent install

    Hi, I was wondering if the SBC script could be updated with a headless/silent install. like this "wget https://downloads-global.3cx.com/downloads/sbc/3cxsbc.sh -O- | bash /dev/stdin -url "URL" -key "KEY" -y". Thanks in advance.
    • Wesley Telecomlijn
    • Thread
    • 3cx sbc 3cxsbc sbc sbc - deploy sbc border controller tunnel
    • Replies: 0
    • Forum: Server

  11. Solved Remote connections from same WAN IP as SBC

    I have what might be an usual issue with 3CX and I'm trying to figure out what might be causing it. I'm learning 3CX as I go along, so please forgive any glaring gaps in my knowledge. Recently, everybody on the system has been sporadically receiving calls from telephone numbers that also...

  12. SBC for Windows: how edit/modify the Authentication KEY ID ?

    Hello I had to reinstall an 3CX phone system on Google Cloud (unfortunately without a backup). I wanted to know how to proceed to change the Authentication KEY ID in SBC for Windows. I can't use the old key because I don't know it and I have to modify on 4 company PCs in different locations. I...

  13. Solved 2nd raspbian SBC not connecting

    Created a rPi SBC with v15--worked perfectly and still does. Upgraded to v16 (16.0.910) Created a new rPi, with Stretch Lite; during SBC installation process, fails at provisioning step. Tried IP instead of domain Ensured local firewall setup properly Moved to different ISP/location Deleted /...

  14. do i have to use a sbc if i deploy 3cx in the cloud

    i'm experimenting and just deployed a trial of 16 using pbx express on google cloud. the pbx is running and i connected to it with an android mobile client which goes through the 3cx tunnel. i'm trying to connect an ip phone to the pbx but am having a hard time figuring out the fanvil x4...

  15. How to monitor SBC connection on 3CX server

    Hello, I am trying to figure out why my SBC server is disconnected when it connects to the 3CX server. See "SBC on Debian get disconnected" thread from Jan. 14, 2019. One suggestion was to see what is happening on the 3CX server side. I turned the Activity log on to verbose and did not see...

  16. Idea's for Moving from on premise to Cloud

    We have 3 separate clinics. We tried 3cx at one with an onsite PBX and like it. We are looking at moving our pbx to the cloud so that all offices can point to the same one. Are SBC's the way to go, or create a vpn tunnel to each location from our cloud server? Can you have more than one SBC in...
    • Logan Nordly
    • Thread
    • cloud cloud express pbx recommendation sbc sbc border controller tunnel tunnel vpn
    • Replies: 3
    • Forum: Phone System / PBX

  17. SBC on Debian get disconnected

    Hi, I am having problems connecting my 3CXSBC to a pbxexpress in Azure. Here is my conf and error. I have rechecked all my settings but I get disconnected. I see the connections leaving my office to the Azure ip address. Names have been changed to protect the innocent. xxx.xxx.xxx.200 azure...

  18. 3cxsbc not reconnecting after a network failure

    Hi, I'm using sbc on a debian server internally and when the server is not reachable for some time, for example because of a network outage or 3cx restarting for ssl certificate renewable the sbc did not reconnect and stay with message saying tunnel is not connected. After restarting the...

  19. Solved Cloud-PBX App Provisioning (Internal DNS?)

    Hey, I've set up a 3CX PBX on Azure and an SBC in my internal network. Firewall check on the Azure-Hosted 3CX runs without errors. For the SBC, there's a DNAT rule for Port 5090. I've configured the 3CX App on my phone via QR code scanning, after I've set the "Network interface for...
    • SKDamon
    • Thread
    • sbc border controller tunnel
    • Replies: 15
    • Forum: Android

  20. Problems whith 3cx SBC

    Hi Guys, We use 3cx for our telephony. currently we are using version 15.5. A few months ago we had a problem with the hardphones. The sound quality was very poor. For this we have installed an SBC on a windows server. Then the sound quality was much better. However, we now have different...
3CX Logo Footer Copyright © Sitemap Privacy
Top Bottom