sbc cluster

  1. sbc cluster HA failure

    Good morning, I haven't found any posts about this problem. One of this customer's SBCs in HA has stopped working. I took the machine to the lab and noticed that the cluster is no longer present. How should I restore it? Now the customer is left with only sbc02. Can I reinstall from...

  2. Will Debian 13 fix the SBC HA Cluster Breakage Issue?

    In reference to the SBC High Availability docs and quoting from the last bullet point of "Known Issues and Limitations" I have this exact issue when doing Ethernet switch firmware updates. A couple of weeks ago I did a switch firmware update, and both SBCs in a HA pair were not able to be...

  3. Solved HA Cluster new SBC provisioning

    I'm installing the SBC .iso on a NUC as the first node in what will be a HA cluster setup. I've got through everything fine until it asks for the Provisioning URL & Authentication KEY ID I went onto 3CX - SIP Trunks - Add SBC and created a new SBC. When I enter the URL & Authentication KEY ID...
    • rbailey101
    • Thread
    • sbc cluster
    • Replies: 9
    • Forum: UK

  4. Phones are connecting differently.

    Hi, I have a case here where some phones are connecting via SBC Cluster IP and some are connecting to SBC1 or SBC2, how do we control the phones to connect to the cluster IP instead of specific SBC? See attached for reference, the 192.168.170.10 is the SBC cluster IP Thanks!

  5. Fanvil X6U not associating to HA SBC without reboot

    We have a hosted 3cx instance, with two SBCs running in an HA arrangement. The SBCs failover and stay connected to the PBX fine, but our Fanvil phones do not connect the backup SBC if the primary is taken offline. Is there something I'm missing, or am I seeing some kind of firmware bug on the...
    • slightlyevolved
    • Thread
    • fanvil high availability hosted sbc sbc cluster x6u
    • Replies: 3
    • Forum: Fanvil

  6. SBC HA Cluster Resources Failed

    Hi All, I'm installing an SBC HA cluster and am getting an error after the installation. I installed both SBCs into the cluster then ran the crm status command which came up with the below error. I have tried purging 3cxsbc from both SBCs and am getting the same error after installing only the...

  7. Hosted 3CX Windows based for HA (Cluster)

    Hi All, We're considering moving to 3CX phone system, and I was wondering if there is a way to cluster 2x 3CX setups based on windows server? I found for Linux (Debian, Rasperi Pi) something called SBC Cluster Node, but no info regarding Windows based setup. Many thanks

  8. SBC Cluster possible on Raspberry Pi 4 (Raspbian Buster)?

    Greetings, I've spend a couple of hours today on trying to get an SBC Cluster working with two Raspberry Pi 4's (4GB) but to no avail.. Is it even possible to have an SBC Cluster on Raspbian Buster (v10)? As I see conflicting data in the guides: • "be two (2) PCs or Raspberry Pis with the...
    • MSCO
    • Thread
    • border session controller high availability raspberry pi 4 raspbian buster sbc sbc cluster
    • Replies: 6
    • Forum: Phone System / PBX

  9. 3CX SBC MAC-adres & Linux hostname

    Hi, I've a good idea. The idea is to show the MAC-address of the SBC at the SBC information tab. The reason why this would be nice is because then I can easily pass on the mac address to the customers ICT party so they can reserve the MAC address out of the DHCP scope. And another reason would...
    • Wesley Telecomlijn
    • Thread
    • 3cx sbc border session controller cluster high availability sbc sbc cluster sbc ha
    • Replies: 0
    • Forum: Server
3CX Logo Footer Copyright © Sitemap Privacy
Top Bottom