sbc down

  1. Wake On Lan from 3CX firmware to 3CX SBC

    Since Fanvil use BusyBox as their embedded OS (Not sure about Yealink). It should be possible to make a 3CX firmware that periodically sends WoL packets via the ether-wake command to the SBCs MAC address (Should it not get a registration response from its IP address) to start up the SBC...
    • tcg-david
    • Thread
    • 3cx sbc firmware sbc down session border controller
    • Replies: 0
    • Forum: Other

  2. sbc cluster HA failure

    Good morning, I haven't found any posts about this problem. One of this customer's SBCs in HA has stopped working. I took the machine to the lab and noticed that the cluster is no longer present. How should I restore it? Now the customer is left with only sbc02. Can I reinstall from...

  3. New issue with Hosted 3CX and SBC on Debian

    Today at around 1PM I noticed our Debian SBC went offline in the 3CX admin portal. I logged into the SBC and found it was running and able to ping Google. I rebooted and checked for updates and got a green message that the SBC was running successfully however it remained offline in 3CX admin...

  4. SBC not connecting from specific location following update to v20

    We are having an issue with one specific office where SBCs will no longer connect to the PBX. When plugged in at our primary office, the SBC is able to reach the PBX without issue. As a side note, the PBX is hosted from Azure and is connected with a site-to-site VPN. All of our offices are...
  5. David_K

    SBC gets disconnected 10-20 times a day

    Hello Since 1 or 2 weeks, we have 2 customers with SBCs getting disconnected 10-20 times a day. They loose connexion for 1 or 2 minutes, then UP again, then DOWN, UP... Only 2 customers with the problem and nothing changed on our side. First customer, SBC is on a Raspberry. Second customer...

  6. SBC appears as offline

    Since over 2 weeks an SBC appears as "down" without any action from our side. The logs on SBC itself show nothing. The logs on the server show Couldn't find SBC by name '18a71bd5a0cf527aa305a130d52de772', looking up legacy by id 'sbc.c18d0465.18a71bd5a0cf527aa305a130d52de772' when restarting SBC...
  7. rbergthold

    SBC down forward calls

    is there a way that an unavailable forward can be set up, so if system sees that SBC is down, it forwards calls to a preset destination?
3CX Logo Footer Copyright © Sitemap Privacy
Top Bottom