3cx free & linksys spa901

[art83]

hy all...
I've bought 4 spa901, and i want to configure these with this method:
one telephone only receive (TELEPHONE A) and the other 3 (TELEPHONE B, C, D) only call A.
the most important features is: whenever i raise up the phone, automatically it call the telephon A, whitout i press keys...

it's possible??? i hope and i think yes!! plese help me!
ps: now the telephones B, C, D just call A but if i press the number of telephone A!

 

[matthijsolislagers]

Some phones have functions like auto dial. If I'm right the grandstream. Maybe the linksys does too.

 

[miraportuga]

yes its possible

First of all, make the extensions on 3cx and configure them on each phone then you will have to do this
No need to touch on Telephone A configuration
On telephone B,C,D you go to EXT1 tab and under dialing rules you should have something like
(*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.)

now, you will have to add "P3<:8000>" (without the ") to the end it should show something like

(*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.|P3<:8000>)

now P3 <- this number will be the amount of seconds it will take the phone to dial the number you want after you lift the handset
the number insice <:8000> will be the extension that the phone will call

So, Phone A - Ext 1000
Phone B - Ext 2000
Phone C - Ext 3000
Phone D - Ext 4000

on Phone B,C,D you should have something like (*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.|P3<:1000>)

With this it would take 3 seconds to call to extension 1000

Hope that helped

Cheers