3CX server and Patton 4552 no active line

Status
Not open for further replies.

erwan44

Joined
May 19, 2008
Messages
1
Reaction score
0
hi,

we have tryed to configure the patton 4552 with 3cx server. using the configuration fil generated by 3cx, but the line is not registered...
if any body have a solution as a good configuration for this hardware, i am interested :) ....

thank all

my configuration files.

#########################################################
#
# For SN-4552 1-port BRI
#
# Author: Kevin Attard Compagno
# Date: 2008-04-03
# Contact: [email protected]
#
#########################################################

webserver port 80 language en

system

ic voice 0
low-bitrate-codec g729

system
clock-source 0 0

profile ppp default

profile call-progress-tone defaultDialtone
flush-play-list
play 1 1000 440 0

profile call-progress-tone defaultAlertingtone
flush-play-list
play 1 1500 440 -7
pause 2 3500

profile call-progress-tone defaultBusytone
flush-play-list
play 1 500 440 -7
pause 2 500

profile call-progress-tone defaultReleasetone
flush-play-list
play 1 250 425 -7
pause 2 250

profile call-progress-tone defaultCongestiontone
flush-play-list
play 1 250 425 -7
pause 2 250

profile tone-set default

profile voip default
codec 1 g711alaw64k rx-length 20 tx-length 20
codec 2 g711ulaw64k rx-length 20 tx-length 20
fax transmission 1 relay t38-udp

profile pstn default

profile sip default
no autonomous-transitioning

profile aaa default
method 1 local
method 2 none

context ip router

interface IF_IP_WAN
ipaddress dhcp
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu

interface IF_IP_LAN
ipaddress 192.168.1.230 255.255.255.0
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu

context cs switch

mapping-table calling-pi to calling-e164 MP_REM_CLIR
map restricted to ""

routing-table called-e164 RT_ISDN_TO_SIP_0
route default dest-interface IF_SIP_0 MP_REM_CLIR

interface isdn IF_ISDN_0
route call dest-table RT_ISDN_TO_SIP_0

interface sip IF_SIP_0
bind gateway GW_SIP_0
early-connect
early-disconnect
service default
route call dest-interface IF_ISDN_0
remote-party-id called-party
address-translation outgoing-call request-uri user-part fix 10000 host-part to-header target-param none
address-translation incoming-call called-e164 request-uri

context cs switch
no shutdown

gateway sip GW_SIP_0
call-signaling-port 5060
bind interface IF_IP_LAN router

service default
domain 192.168.1.248
defaultserver manual 192.168.1.248 loose-router
registration-lifetime 300
registration manual 192.168.1.248
user 10000 authenticate name 10000 password 10000 default register

gateway sip GW_SIP_0
no shutdown

port ethernet 0 0
medium auto
encapsulation ip
bind interface IF_IP_WAN router
no shutdown

port ethernet 0 1
medium auto
encapsulation ip
bind interface IF_IP_LAN router
no shutdown

port bri 0 0
clock auto
encapsulation q921

q921
protocol pmp
uni-side auto
encapsulation q931

q931
protocol dss1
uni-side user
encapsulation cc-isdn
bind interface IF_ISDN_0 switch

port bri 0 0
no shutdown


Erwan
 
Status
Not open for further replies.

Forum statistics

Threads
111,891
Messages
589,591
Members
164,758
Latest member
rmf