3cx trunk to trunk (aster`s call)

[vpaulo]

Hi colleagues!

I use 3CX minimum over 10 years. Well, how many it is possible??? When you return normal functions of calls between trunks? And trust beetwen trunk to trunks call??

Well again, why should I remember an asterisk and to realize everything on it. You lose so many clients.

Why CEO Nick Galea can't persuade to be returned this functionality. Technical specialists know about what I speak. If you don't need sales, clients and successful implementation of projects aren't necessary???

IMHO, Блиять продайте уже 3CX, and bury him behind a wall, and We`ll go back to an asterisk, cisco and other products.

Paul.

 

[leejor]

I'm sorry...I don't understand what you are actually complaining about. You need to provide some additional details.

 

[craigreilly]

If you don't like it don't buy it.

 

[vpaulo]

see att.

If you don't like it don't buy it.

I don`t ask you about what I need to buy.

 

[leejor]

So...what type of trunk (3CX settings) is being used to access the GSM network? Is it a trunk to a GSM gateway?

 

[donbru01]

Can you configure trunk to gsm provider how Bridge ?

 

[vpaulo]

So...what type of trunk (3CX settings) is being used to access the GSM network? Is it a trunk to a GSM gateway?

Simple sip trunk without autorization. LIke sip provider. It`s not GW.

Can you configure trunk to gsm provider how Bridge ?

what you mean?? bridge. In the GSM operator (next side sip-to-sip trunk) they`ve private software platform. It`s not 3cx. So, how can I switch this trunk in bridge mode??

paul

 

[donbru01]

Trunk - to - trunk call across the bridge work .
you can setup 3CX how master and receive registration , than your custom application send registration .
For caller-id you can manipulate more field how-to send Caller-id

---------------------------------------------------------
Without bridge It is possibile work around for few your question :

point 2- Incoming 499 from provider : than you can create a dummy extension 1499 with call forward to 499 , you manage incoming DDI 499 to 1499 and it's work .


point 6 - need Bridge connection

 

[vpaulo]

Trunk - to - trunk call across the bridge work .

ok. How? bridge in 3cx we can create only with another 3cx. In my case, the second part is operator`s soft switch.

you can setup 3CX how master and receive registration , than your custom application send registration .
For caller-id you can manipulate more field how-to send Caller-id

maybe, but when user press "499" while incoming call from voip prov, system say - not found.

Without bridge It is possibile work around for few your question :
point 2- Incoming 499 from provider : than you can create a dummy extension 1499 with call forward to 499 , you manage incoming DDI 499 to 1499 and it's work .
point 6 - need Bridge connection

HOW?

 

[donbru01]

Hi VPaulo , were you able to connect asterisk with 3cx via bridge, I made one today...