3cx Yealink Templates

[2nd]

Does anyone know what template the Yealink T29G uses?
I need to edit the template for the call forward to work but there is templates for 3x, 4x, 5x, CP etc but no 2x

 

[GeekSqueak]

Check @complex1 's post below. Thanks Complex1.

PS. We have a fleet of Yealink T20P phones and we had to disable the feature key synchronization setting to get call forward to work on the phones. This may not be the case for newer Yealink phones.

 

[complex1]

Hi,

To provision the Yealink T29G please use the yealinkT4x.ph template.

 

[2nd]

Check @complex1 's post below. Thanks Complex1.

PS. We have a fleet of Yealink T20P phones and we had to disable the feature key synchronization setting to get call forward to work on the phones. This may not be the case for newer Yealink phones.

Thats exactly what im doing
Thanks

 

[2nd]

Hi,

To provision the Yealink T29G please use the yealinkT4x.ph template.

Perfect
Thankyou

 

[GeekSqueak]

If anyone is going to use custom templates, for Yealink Phones, please pay close attention to the Yealink specific configuration in the 3CX custom template tutuorial found here:
https://www.3cx.com/docs/custom-ip-phone-templates/

Just food for thought,
GeekSqueak