Solved Anyone having trouble with downloads.3cx.com?

[drewt]

I am trying to install an SBC on raspi B+, and when running wget http://downloads.3cx.com/downloads/sbc/3cxsbc.zip -O- | sudo bash I receive "failed:no route to host" A ping to 151.80.125.73 returns no respose.

 

[AWS2P]

Not seen the same problem , just a post on french forum relating messages during install on Pi
https://www.3cx.fr/forum/threads/installation-3cx-sur-raspberry.93179/

 

[drewt]

Something broken, can do all my updates and install dataplicity, but no sbc software download.

 

[cobaltit]

Try downloads-global.3cx.com . Sounds like the guide hasn't been updated.

 

[StefanW]

no route to host is a network config error on the device itself.
Most 3CX hosts do not respond to pings, so that's normal

 

[drewt]

Try downloads-global.3cx.com . Sounds like the guide hasn't been updated.

That was it, as soon as I used updated global downloads url it worked. I was able to install my monitoring software and ping the internet, the sbc install would only fail with no route to host. can we get the guide updated?

 

[drewt]

Turns out I did have an error in /etc/dhcpcd.conf file. I had correct namservers of 8.8.8.8 and local gateway, but my routers=192.168.1. was missing last number. I could download packages for dataplicity and 3cx etc but 3cxsbc would not start, even after downloading correct packages from downloads-global.3cx.com. I had partial internet access, enough to download packages, but not enough for 3cxsbc to start up after install.