Best way to Implement 3CX for a client with 2 independent Branches

[vincent Kavila]

Hello community

I have a client who wants to implement 3CX on their 2 branches which are independent.
What is the best way to go about it?

 

[Evolute IT]

2 instances with bridging.

 

[Saqqara]

Cloud based 3CX, with each location having sbc server to manage the handsets

Probably need more info on setup - how many handsets , 3cx apps at each site, etc

 

[vincent Kavila]

Cloud based 3CX, with each location having sbc server to manage the handsets

Probably need more info on setup - how many handsets , 3cx apps at each site, etc

In total are 25 handsets on all sites and over 30 softphones. Also, there will be a Yeastar TG1600 gateway, will it work with the cloud PBX?

 

[Saqqara]

One internal 3CX server, connected to the Yeastar TG1600 - not 3cx supported so you will have to manually configure it , or see if Yeastar have some configuration guides.

At the other site SBC server, handsets will use sbc server.

Softphones connect directly with the 3CX server using 3cx tunnel

 

[vincent Kavila]

One internal 3CX server, connected to the Yeastar TG1600 - not 3cx supported so you will have to manually configure it , or see if Yeastar have some configuration guides.

At the other site SBC server, handsets will use sbc server.

Softphones connect directly with the 3CX server.

Okay, I think this makes sense to me. For the TG1600 I will manage, I have done it before.
Will a cloud PBX work as well?

 

[Saqqara]

Make sure the 3CX and SBC server meets 3cx requirements - https://www.3cx.com/docs/recommended-hardware-specifications-for-3cx/