Dear Forum members,
We have 3cx running on a VPS in a datacenter, this vps is equal to the wan ip accessible, without hardware firewall. Only through software firewall get this vps protected.
What the problem is:
We use linksys SPA962 devices without problems connecting to the PBX. Also call and sound is fine.
Where I only against to walk the next blf that the function will not work. The light continues to blink orange.
If I check the firewall allows running 3cx he gives no errors.
Furthermore, as blf rain the following:
fnc=blf+sd+cp;sub=100@$PROXY;ext=100@$PROXY;nme=Test
Furthermore, we use V11 from 3cx with SP 1 on it.
What could the problem be?
Is there somewhere something set or??
Thanks for your answer
Mvg leendert
We have 3cx running on a VPS in a datacenter, this vps is equal to the wan ip accessible, without hardware firewall. Only through software firewall get this vps protected.
What the problem is:
We use linksys SPA962 devices without problems connecting to the PBX. Also call and sound is fine.
Where I only against to walk the next blf that the function will not work. The light continues to blink orange.
If I check the firewall allows running 3cx he gives no errors.
Furthermore, as blf rain the following:
fnc=blf+sd+cp;sub=100@$PROXY;ext=100@$PROXY;nme=Test
Furthermore, we use V11 from 3cx with SP 1 on it.
What could the problem be?
Is there somewhere something set or??
Thanks for your answer
Mvg leendert
