Call termination on all my "phones"

[Alessandro Ranieri]

Hi everybody,
I'm quite new to 3cx and after installing V15 (debian iso) everything seems working well, but I'm facing a strange problem: If I reject an incoming call with my desk phone, my iOS 3cx client keeps ring and the call remain active.
The deskphone is a grand stream GXP 2160 provisoned by a 3cx template provided by grandstream.
Thanks in advance.

Alessandro

 

[YiannisH_3CX]

Hello @Alessandro Ranieri

Please note that what you are experiencing is the default behaviour. When forking the call into two or more devices the call is not dropped until it is rejected from all devices or the call is answered or it reaches the call time out.

 

[Alessandro Ranieri]

Hi Yiannish,
thanks for your reply, I didn't know that is the default behaviour, but if I reject the call from my iOS or pc client the call is dropped from all devices, instead if I drop the call from my deskphone the call is dropped from the deskphone, from the pc client but not from the iOS client.
Thanks

A.

 

[JasonNadeau]

Yup, it's normal. Rejecting via the 3cx app sends a different busy code to 3cx pbx. There's a workaround for yealink phones, not sure about grandstream.

 

[Alessandro Ranieri]

Hi Jason thank you very much,
can you please tell wich is the workaround for the yealink phones?
Thanks in advance

A.

 

[JasonNadeau]

In the yealink, in the call forwarding settings under call forward on busy put in a dummy extension that goes right to the users voice-mail. Don't turn on the forward on busy, just put a value in the busy forward box. Hitting reject on the yealink sends the caller to the forward on busy destination. I can't remember if we can put *4 + extension number - don't think so (hence the dummy extension)

 

[Alessandro Ranieri]

Many thanks man.

A.