Calls Rejected - Internal

Status
Not open for further replies.

carlos.asj1

Joined
Aug 1, 2008
Messages
3
Reaction score
0
Hy, this is my first time using the 3CX Phone System.
I set up a lab environment using Virtual PC 2007 + Windows Server 2003. The installation was just fine, and in the other two virtual machines (Windows XP) the 3CX Voip Client it's registered on the server.
Than I create two extensions 1000 and 1001 (4 digits), but when I try to call the other virtual machine, I got Forbidden!
This is the server log:

18:59:13.640 Call::Terminate [CM503008]: Call(1): Call is terminated

18:59:13.640 CallCtrl::onIncomingCall [CM502001]: Source info: From: 1; To: "3CXPhone"[sip:[email protected]:5060];tag=b200353c[sip:[email protected]:5060]

18:59:13.640 CallCtrl::onIncomingCall [CM503013]: Call(1): Incoming call rejected, caller is unknown; msg=SipReq: INVITE [email protected]:5060 tid=5c3d085bbf5f5529 cseq=INVITE [email protected]:5070 / 2 from(wire)

18:59:12.949 evt::CheckIfAuthIsRequired::not_handled [CM500002]: Unidentified incoming call. Review INVITE and adjust source identification:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.0.20:5070;branch=z9hG4bK-d8754z-4e4a255b6e67870f-1---d8754z-;rport=5070
Max-Forwards: 70
Contact: [sip:[email protected]:5070]
To: [sip:[email protected]:5060]
From: "3CXPhone"[sip:[email protected]:5060];tag=b200353c
Call-ID: YTg5MWM1YWU4YTU1OTNhMWNhNTNlZmM2YTNkNDU3ODA.
CSeq: 1 INVITE
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REGISTER, SUBSCRIBE, NOTIFY, REFER, INFO
Supported: replaces
User-Agent: 3CX Phone 6.0.727.0
Content-Length: 0

18:59:12.949 evt::CheckIfAuthIsRequired::not_handled [CM302001]: Authorization system can not identify source of: SipReq: INVITE [email protected]:5060 tid=4e4a255b6e67870f cseq=INVITE [email protected]:5070 / 1 from(wire)

I'm a newbie at this .. so any help will great.
I don't set lines or outbound rules, since the virtual machines can't connect to internet and I'm trying to make a internal call.

Thanks
 
Problem solved !!

I've configure the FQDN of the SIP server on the client. I don't know why, when I put only the IP, it work!
 
Status
Not open for further replies.

Latest Posts

Forum statistics

Threads
111,888
Messages
589,564
Members
164,753
Latest member
GemmaC