Cant Call Out

[uk26]

Hi, i cant seem to dial out

Any ideas

I get the message on the phone (Destination not found)

error logs


19:21:26.046 [CM503008]: Call(32): Call is terminated

19:21:26.041 [CM503015]: Call(32): Attempt to reach <sip:[email protected]:5060> failed. Reason: Not Found

19:21:26.040 [CM503003]: Call(32): Call to sip:[email protected]:5060 has failed; Cause: 404 Not Found; warning: Noisy feedback tells: pid=10759 req_src_ip=77.240.48.201 req_src_port=5060 in_uri=sip:[email protected]:5060 out_uri=sip:[email protected]:5060 via_cnt==2; from IP:77.240.48.201:5060

19:21:22.524 [CM503004]: Call(32): Calling: VoIPline:800800150@(Ln.10001@VOIP TALK)@[Dev:sip:[email protected]:5060]

19:21:22.418 [CM503010]: Making route(s) to <sip:[email protected]:5060>

 

[Cjay]

By the looks of things you are dialing a UK 0800xxx number, but what is actually being sent to Voiptalk is 800xxx - which Voiptalk rejects. Do you have an outbound rule set up that is inadvertently stripping off the leading 0? [and a supplementary question - does Voiptalk accept 0800 calls? on my system I route these over my BT line via a SPA3102 gateway]

Chris

 

[uk26]

Hi, Right i have updated the settings as you suggested and that work. thanks for the tip

now, when i make an outgoing call, i get the ringing tone for like 5 seconds before it actually connects the call


makes you think when you hear the ringing that it is actually ringing the dialed number, but its not the case there is a delay

any ideas?

 

[LeonidasG_3CX]

Unfortunately as far as i know you are gonna have to live with the Delay

 

[uk26]

Why is there a delay in the system? why does it play a ringing tone when the call has yet to be passed to the Sip provider?

 

[LeonidasG_3CX]

I'm just making a guess here.

I cant answer myself why there is a delay in your system, it can be anything, but the part where you can hear a ringing tone when you make a call is considered normal.
Let me answer your question with another question
Would you prefer not to hear a Ringing tone when you make a call? It's just an indication that a call is in progress.
Even if the temporary Ringing tone was removed i sincerely cant see how it would be a change towards the best.

That's just my opinion nothing more...


if you disagree with me you can just post it as a Feature Suggestion on the appropriate forum, you should get some decent feedback there.

 

[uk26]

i was more concerned why there is a delay in connecting calls between 5-8 seconds then it will connect the call to the voip provider.

if i connect the phones direct to the provider it connects right away

 

[uk26]

also i appear to get a double rinning tone

1 for the 3CX System and one for the call its self and you can hear them both over lapping

 

[N_G]

First of all i suggest using a support VoIP Provider first such as SIPgate and see if the problem persists.

Secondly, check that you are using the STUN servers recommended by your VOIP provider. (see manual how to configure this)