Cisco 7960 SIP update problem

[tms]

Hello,

I'm trying to update cisco 7960 to SIP but so far haven't succeeded.

Currently phone has 6.0(1.0) probably original version and am trying to update it to SIP 08-8-00 When phone contacts to TFTP it says:

File not found: SEP<macaddress> and Load ID incorrect

I have these files @ TFTP server

OS79XX.txt
P0S3-08-8-00.loads
P0S3-08-8-00.sb2
P003-08-8-00.bin
P003-08-8-00.sbn
SIP<mac>.cnf
SIPDefault.cnf
XMLDefault.cnf.xml

I have also tried with SEP<mac>.cnf.xml but actually I'm not sure is my load information correct.

One annoying thing more is that phone loses TFTP Server information and I need to config it again and again...Help & Ideas are much appreciated! Thanks in advance.

 

[canyon289]

Maybe you're getting a TFTP timeout because the TFTP server you specified in the DHCP settings on your server were incorrect?

I don't know. My setup is so simple. This is all I have (Router - Phone - Computer) with both devices connected to the router. The computer is the TFTP server and has 3cx installed on it. I previously had it running but I was able to specify my computer as the TFTP server in the phone. This time the phone isn't allowing me to change anything, telnet and directly.
When I get home later I'm going to use the hub and see if wireshark will give me the necessary ip.

 

[canyon289]

I finally got it. After so much effort. Turns out it the TFTP IP was 192.168.1.1 which is the same as the router. I was confusing requests for the server for requests for the router. Finally got everything setup and the Skype gateway running and all that.

 

[odf]

Hello,
Reading, I could already solve the issue with cisco phones?, Please could help me is that I have problems with the structures of the files, telephones already have SIP firmware, but I can not assemble the correct configuration of XML, I thank you if I can help.

 

[sunstate]

I'll post you some Configuration files for 7940/41 to try out, but i doubt they will work due to some minor differences in the XML structure.

Hi Leonidas,

Would you mind posting your SIPDefault.cnf and SIPxxxxxxxxxxxx.cnf files? I am trying to land a 125 extension deal that is dependent on me getting 7940's and 7960's working properly. I got them flashed with no problems, now I just need to create the configs. Do you happen to have them for the 7960 as well?

 

[LeonidasG_3CX]

Here's the files, try them out and see if they work.
You would have to edit the IP's / Extension Numbers in the files themselves first.