Cisco IP Phone File list

[Felus]

ok im getting a cisoc 7960 soon and im just wondering if i got the TFTP files correct in the coding before i plug into my network. Ive been gathering infromation from goggling to find the files configs i hope this are right

Server IP is 192.168.1.120. Note im still waiting to find out what frimware that the phone is runing because it already has SIP installed on it.

xmldefault.cnf.xml

<Default>
<callManagerGroup>
<members>
<member priority="0">
<callManager>
<ports>
<ethernetPhonePort>2000</ethernetPhonePort>
<mgcpPorts>
<listen>2427</listen>
<keepAlive>2428</keepAlive>
</mgcpPorts>
</ports>
<processNodeName>192.168.1.120</processNodeName>
</callManager>
</member>
</members>
</callManagerGroup>
<loadInformation7 model="IP Phone 7960">P003-07-4-00</loadInformation7>
<authenticationURL></authenticationURL>
<directoryURL></directoryURL>
<idleURL></idleURL>
<informationURL></informationURL>
<messagesURL></messagesURL>
<servicesURL></servicesURL>
</Default>

SIPdefault.cnf

image_version: "P0S3-08-2-00"
proxy1_address: "192.168.1.120"
proxy1_port:"5060"
proxy_emergency: "192.168.1.120"
proxy_emergency_port: "5060"
proxy_backup: "192.168.1.120"
proxy_backup_port: "5060"
outbound_proxy: ""
outbound_proxy_port: "5060"
nat_enable: "0"
nat_address: ""
voip_control_port: "5061"
start_media_port: "16384"
end_media_port: "32766"
nat_received_processing: "0"
proxy_register: "1"
timer_register_expires: "3600"
preferred_codec: "none"
tos_media: "5"
enable_vad: "0"
cnf_join_enable: "1" ; 0-Disabled, 1-Enabled (default)
semi_attended_transfer: "0" ; 0-Disabled, 1-Enabled (default)
telnet_level: "2" ; 0-Disabled (default), 1-Enabled, 2-Privileged
dtmf_inband: "1"
dtmf_outofband: "avt"
dtmf_db_level: "3"
timer_t1: "500" ; Default 500 msec
timer_t2: "4000" ; Default 4 sec
sip_retx: "10" ; Default 11
sip_invite_retx: "6" ; Default 7
timer_invite_expires: "180" ; Default 180 sec
timer_invite_expires: "120"
messages_uri: "*97"
tftp_cfg_dir: "./"

SIP<waiting on mac addy>.cnf

phone_label: "7960..."
line1_name: "101"
line1_shortname: "101"
line1_displayname: "James"
line1_password: "********"
line2_name: "UNPROVISIONED"
line2_shortname: "UNPROVISIONED"
line2_displayname: "UNPROVISIONED"
line2_password: "UNPROVISIONED"
line3_name: "UNPROVISIONED"
line3_shortname: "UNPROVISIONED"
line3_displayname: "UNPROVISIONED"
line3_password: "UNPROVISIONED"
line4_name: "UNPROVISIONED"
line4_shortname: "UNPROVISIONED"
line4_displayname: "UNPROVISIONED"
line4_password: "UNPROVISIONED"
line5_name: "UNPROVISIONED"
line5_shortname: "UNPROVISIONED"
line5_displayname: "UNPROVISIONED"
line5_password: "UNPROVISIONED"
line6_name: "UNPROVISIONED"
line6_shortname: "UNPROVISIONED"
line6_displayname: "UNPROVISIONED"
line6_password: "UNPROVISIONED"
line1_authname: "101"
line2_authname: "UNPROVISIONED"
line3_authname: "UNPROVISIONED"
line4_authname: "UNPROVISIONED"
line5_authname: "UNPROVISIONED"
line6_authname: "UNPROVISIONED"

dailplan.xml

<DIALTEMPLATE>

<TEMPLATE MATCH="*" Timeout="5"/> <!-- Anything else -->

</DIALTEMPLATE>

ringlist.DAT

Piano 1 Piano1.raw
Piano 2 Piano2.raw
Pop Pop.raw
Pulse Pulse1.raw
Old Style ringer1.pcm
Synth Low ringer2.pcm

What else do i need to edit also do i need anymore files.

 

[huzer1]

Honestly that configuration looks just fine to me.

 

[Felus]

Thanks im just a lil paranoid that the coding is wrong cuz i was trying to install a 7910 with SCCP protcal to a Trixbox and that didnt work out well... so im hoping that this will make my 7960 connect to 3cx

 

[huzer1]

Only comment that I could make about it is that the section where you have

line2_name: "UNPROVISIONED"
line2_shortname: "UNPROVISIONED"
line2_displayname: "UNPROVISIONED"
line2_password: "UNPROVISIONED"
line3_name: "UNPROVISIONED"
line3_shortname: "UNPROVISIONED"
line3_displayname: "UNPROVISIONED"
line3_password: "UNPROVISIONED"
line4_name: "UNPROVISIONED"
line4_shortname: "UNPROVISIONED"
line4_displayname: "UNPROVISIONED"
line4_password: "UNPROVISIONED"
line5_name: "UNPROVISIONED"
line5_shortname: "UNPROVISIONED"
line5_displayname: "UNPROVISIONED"
line5_password: "UNPROVISIONED"
line6_name: "UNPROVISIONED"
line6_shortname: "UNPROVISIONED"
line6_displayname: "UNPROVISIONED"
line6_password: "UNPROVISIONED"
line1_authname: "101"
line2_authname: "UNPROVISIONED"
line3_authname: "UNPROVISIONED"
line4_authname: "UNPROVISIONED"
line5_authname: "UNPROVISIONED"
line6_authname: "UNPROVISIONED"

Is really unneeded to have it all in there. I don't really think it matters but for the purpose to showing my files are basically

; phone-specific configuration file sample
; Line 1 phone number
line1_name : 104 ;

; Line 1 name for authentication with proxy server
line1_authname : 104 ;

; Line 1 authentication name password	
line1_password : 104 ;

#Proxy server address
proxy1_address: 10.0.0.19 ;

proxy_register: 1 ;

Also sorry for the late reply, I missed the fact that you had replied, Best of luck!