Cisco spg514g template Daylight saving enable

[David10]

Hi,

Trying to change the provisioning template for the cisco spg514 so that it shows the right time. Found the step on the phone i need to change but unsure of how to change the pro template to get it to push the change out to all phones

<Daylight_Saving_Time_Enable group="Regional/Miscellaneous">%%dstEnableDisable%%</Daylight_Saving_Time_Enable>
<Daylight_Saving_Time_Rule

It is currently set to no but need to change it to yes.

Many Thanks

 

[bob222]

Under Troubleshooting/Parameters, is the value of the "DST" parameter 1 ? If it is set to 0, that might be the issue.

Also, I replaced the original template rule for daylight saving time with this:

<Daylight_Saving_Time_Rule group="Regional/Miscellaneous">start=3/8/7/02:0:0;end=11/1/7/02:0:0;save=1</Daylight_Saving_Time_Rule>

This worked for me in March (in the US). 3CX seems to use specific start and end dates in the template. The rule above should work without having to change dates each year.

 

[NickD_3CX]

This has been discussed here as well: http://www.3cx.com/forums/viewtopic.php?f=1&t=44511