Configuration Nokia E65

[mloggen]

does somebody know the configuration for the Nokia E65 and 3CX ??

 

[abercoms]

Create an extension in 3cx for example "100" and password: "100"
after that enter the settings in your phone

1. Go to "Tools" and then to "Settings"
2. Go to "Connection"
3. Go to "SIP settings"
4. Add a new default profile
5. enter the following settings:

Profile name: 3cx
Service profile: IETF
Default access point: choose your WLAN access point
Public user name: your extension@ip from your 3cx-server (Example: [email protected])
Use compression: No
Registration: Always on or When needed
Use security: No

Proxy server:

Proxy server address: ip from your 3cx-server (example: 192.168.1.1)
Realm: 3CXPhoneSystem
User name: your extension (example: 100)
Password: the password of your extension
Allow loose routing: Yes
Transport type: UDP
Port: 5060

Registrar server:

Registrar serv. addr. : ip from your 3cx-server (example: 192.168.1.1)
Realm: 3CXPhoneSystem
User name: your extension (example: 100)
Password: the password of your extension
Transport type: UDP
Port: 5060

Now go back to "Connection" and then to "Internet tel. settings"

create a new profile:
Name: 3cx
SIP profiles: 3cx

And then it works

 

[N_G]

Thanks abercoms!!

 

[ebiemans]

Create an extension in 3cx for example "100" and password: "100"
after that enter the settings in your phone

1. Go to "Tools" and then to "Settings"
2. Go to "Connection"
3. Go to "SIP settings"
4. Add a new default profile
5. enter the following settings:

Profile name: 3cx
Service profile: IETF
Default access point: choose your WLAN access point
Public user name: your extension@ip from your 3cx-server (Example: [email protected])
Use compression: No
Registration: Always on or When needed
Use security: No

Proxy server:

Proxy server address: ip from your 3cx-server (example: 192.168.1.1)
Realm: 3CXPhoneSystem
User name: your extension (example: 100)
Password: the password of your extension
Allow loose routing: Yes
Transport type: UDP
Port: 5060

Registrar server:

Registrar serv. addr. : ip from your 3cx-server (example: 192.168.1.1)
Realm: 3CXPhoneSystem
User name: your extension (example: 100)
Password: the password of your extension
Transport type: UDP
Port: 5060

Now go back to "Connection" and then to "Internet tel. settings"

create a new profile:
Name: 3cx
SIP profiles: 3cx

And then it works

Thanks, these settings also are useable for the Nokia E60 with Firmware v3

I'm almost there, for some reason the 3CX PBX does see the Nokia as an external device

1. I cannot receive calls, I do receive missed calls
2. Trying to call external via Voip buster I get an entry in the log file

[CM010001] Line configuration does not allow identification of the source of this call. Check Advanced Options for Gateways and Providers and match a field to a correct value from the following: Contact IP: '192.168.122.2'; From: 'thisis'; To: '0031XXXXXXXXX'; Rline: '0031XXXXXXXXX'; Contact: '100'

And when I enable the feature Use "IP in 'Contact' to recognize source"
IP Range : 192.168.122.2

Calls from the Nokia E60 are seen as inbound calls and are not routed to Voipbuster but to an internal number as specified for inbound calls coming from Voipbuster.

-> With the 3CXPhone (softphone) everthing works fine

Thanks for your help

3CX Phone System Version3.0.2295.0

 

[JT]

How to transfert a call with NOKIA E65 ?

Thank you very much for these settings.
My Nokia E 65 is now a very good intern and extern phone.

I have just a problem : I don't know how to transfer a call to another extension ...

Do you know how to do that ?

Thanks

 

[cjammer]

Will this work on a E-62?

Do you know if this will work on a E-62 also?

It has the SIP connections in it.

Most of the settings are the same.

But I do knot know the hardware difference in a E-60, E-62, or a E-65.

If anyone knows let me know.

 

[rodneyeid]

Incoming not working

guys i used the settings you offered herefor E65, i managed to get the profile registered at last (thanks to your help) but my only problem is that i can call out! but i cannot recieve calls. any settings i shoudl do from server

 

[simones181170]

no way to configure my e65 with 3cx

i'm trying wiht Fring,

in fring there are to configure user, pass, and server
for the server i tryied to use the local ip - but don't work
if i put the domain or the ip of the domain the E65 connect as Ext
but i recive incoming call and can make call to the other Ext, but i can't make outgoing call


any idea!!!!!!!!!