Configure PBX with Dialogic Board

[azia]

Hello!

I have 2 computers on same lan with windows xp on both systems. I have dialogic d/4pci card is installed on Computer B and 3Cx server installed on my Computer A. I would like to add PSTN line on 3Cx server there for Dialogic D/4Pci card installed. I am trying to configure/add PSTN line but 3Cx showing me all lines are down and i dont know how to connect my Computer A (3Cx) with Computer B (Dialogic Card)

or

I have no problem to install Dialogic card on computer A but still 3Cx not connecting with Dialogic card.

can any one help me please

regards

 

[N_G]

You need to use one of the supported VoIP gateways as listed on our support page. You will find configuration guides there....

 

[azia]

Hello!

Thanks for your reply. Most of the Voip gateway are expensive. Can you please tell me is "Edge-corE VG007 VoIP Adapter" work with 3Cx?

regards

 

[N_G]

No, in fact voip gateways are much cheaper then Dialogic cards. A grandstream gateway starts at about $150, patton gateways at about $250....

Never heard of the edge adapter you mentioned. Its not supported with 3CX sorry....