Constant nagging

[wewake]

Hi,

Thank you for the great phone system

it's working well so far, except constant nagging

Can not find source by following specs: From: '10000'; To: ''; Rline: ''; Contact: ''

10000 is my pstn GW SPA3102, i have three PSTN GWs and system nags me for all of them

would appreciate some help

thanx for your time in advance

cheers

 

[N_G]

Hi.

Do you mean everything works well except for these messages in the server status log? Both inbound and outbound calls?

Can you post what entries you have made for the VOIP Gateway line?

 

[wewake]

Hi.

Do you mean everything works well except for these messages in the server status log? Both inbound and outbound calls?

Can you post what entries you have made for the VOIP Gateway line?

yes inbound and outbound works well (SPA3102)

as for the settings here you go

3CX

Line(s) Configuration

External Number - my actual pstn number
Internal Number 10000
Outbound Caller ID - anything
Allow outbound calls on this line - checked
Answer incoming calls on this line
Answer after - 0
ID - same as internal number <this is important>
Password - anything
Route inbound calls in office hours - whatever

VoIP Gateway Configuration
Gateway Hostname or IP - can be IP or even FQDN
Gateway Port - same as PSTN line port on SPA3102
rest of the settings are default values

SPA3102

PSTN Line tab
proxy - IP or FQDN
register YES
make call without reg - NO
Ans Call Without Reg - NO
user name - same as internal number
password - whatever you assigned it
Use Auth ID - NO

Dial Plan
Dial Plan 2: (S0:<internal line number>

select Dial Plan 2: for pstn to voip

cheers

p.s. Hold music is out of action as well, I'm using SPA941, SPA3102 and PAP2T plus there is a Digium board getting kicked around. Can there be a real job for it in the future?

 

[archie]

it's working well so far, except constant nagging

Can not find source by following specs: From: '10000'; To: ''; Rline: ''; Contact: ''

10000 is my pstn GW SPA3102, i have three PSTN GWs and system nags me for all of them

Please, open 'Advanced options' for your PSTN gateway and set following settings:

Line-ID matching: Internal number
Line-ID location in 'user' part of: 'From' field

This should help.

Best regards,

 

[wewake]

Please, open 'Advanced options' for your PSTN gateway and set following settings:

Line-ID matching: Internal number
Line-ID location in 'user' part of: 'From' field

This should help.

Best regards,

thank you for the reply

changing those values sure stopped the nagging but also stopped the incoming

The only way around is (uncheck use PSTN CID as VoIP CID), but then it stops forwarding CID

LOG report : Can not find source by following specs: From: 'external number'; To: 'PSTN GW number'; Rline: 'PSTN GW number'; Contact: 'external number'

I captured following packets

3102 -> 3CX SIP Request: NOTIFY sip:3CX IP
3CX - > 3102 SIP Status: 405 Method Not Allowed

a bit not sure about the NOTIFY msg