- Joined
- Sep 9, 2013
- Messages
- 6
- Reaction score
- 0
Hello.
If 3cx client and the telephone is comon subnet - CTI works in both directions - incoming call works and a set of numbers from the 3cx client - works.
If the telephone and 3cx client is in a different vlan for an incoming call on the client displays information about the caller to dial a number but I can not - the information is not transferred to the telephone.
________________-
I also do not understand why some clients get the internal address, and the rest - the address of my firewall to connect to the global network
that route table in cisco router
ciscodhcp#sh ip route
Gateway of last resort is 192.168.254.249 to network 0.0.0.0
C 192.168.12.0/24 is directly connected, Vlan6
S 192.168.13.0/24 [1/0] via 192.168.12.220
C 192.168.14.0/24 is directly connected, Vlan7
C 192.168.10.0/24 is directly connected, Vlan3
C 192.168.11.0/24 is directly connected, Vlan2
C 192.168.21.0/24 is directly connected, Vlan20
C 192.168.0.0/24 is directly connected, Vlan4
192.168.254.0/29 is subnetted, 1 subnets
C 192.168.254.248 is directly connected, GigabitEthernet1/0/12
S* 0.0.0.0/0 [1/0] via 192.168.254.249
that route table in my firewall
Постоянные маршруты:
Сетевой адрес Маска Адрес шлюза Метрика
192.168.10.0 255.255.255.0 192.168.254.250 1
192.168.11.0 255.255.255.0 192.168.254.250 1
192.168.12.0 255.255.255.0 192.168.254.250 1
192.168.15.0 255.255.255.0 192.168.254.250 1
192.168.0.0 255.255.255.0 192.168.254.250 1
80.76.154.169 255.255.255.255 84.52.127.65 1
80.76.156.73 255.255.255.255 84.52.127.65 1
8.8.4.4 255.255.255.255 84.52.127.65 1
8.8.8.8 255.255.255.255 84.52.127.65 1
192.168.21.0 255.255.255.0 192.168.254.250 1
192.168.14.10 255.255.255.255 192.168.254.250 1
91.221.67.141 255.255.255.255 84.52.127.65 1
0.0.0.0 0.0.0.0 80.246.254.145 261
192.168.14.120 255.255.255.255 192.168.254.250 1
192.168.14.121 255.255.255.255 192.168.254.250 1
192.168.14.122 255.255.255.255 192.168.254.250 1
If 3cx client and the telephone is comon subnet - CTI works in both directions - incoming call works and a set of numbers from the 3cx client - works.
If the telephone and 3cx client is in a different vlan for an incoming call on the client displays information about the caller to dial a number but I can not - the information is not transferred to the telephone.
________________-
I also do not understand why some clients get the internal address, and the rest - the address of my firewall to connect to the global network
that route table in cisco router
ciscodhcp#sh ip route
Gateway of last resort is 192.168.254.249 to network 0.0.0.0
C 192.168.12.0/24 is directly connected, Vlan6
S 192.168.13.0/24 [1/0] via 192.168.12.220
C 192.168.14.0/24 is directly connected, Vlan7
C 192.168.10.0/24 is directly connected, Vlan3
C 192.168.11.0/24 is directly connected, Vlan2
C 192.168.21.0/24 is directly connected, Vlan20
C 192.168.0.0/24 is directly connected, Vlan4
192.168.254.0/29 is subnetted, 1 subnets
C 192.168.254.248 is directly connected, GigabitEthernet1/0/12
S* 0.0.0.0/0 [1/0] via 192.168.254.249
that route table in my firewall
Постоянные маршруты:
Сетевой адрес Маска Адрес шлюза Метрика
192.168.10.0 255.255.255.0 192.168.254.250 1
192.168.11.0 255.255.255.0 192.168.254.250 1
192.168.12.0 255.255.255.0 192.168.254.250 1
192.168.15.0 255.255.255.0 192.168.254.250 1
192.168.0.0 255.255.255.0 192.168.254.250 1
80.76.154.169 255.255.255.255 84.52.127.65 1
80.76.156.73 255.255.255.255 84.52.127.65 1
8.8.4.4 255.255.255.255 84.52.127.65 1
8.8.8.8 255.255.255.255 84.52.127.65 1
192.168.21.0 255.255.255.0 192.168.254.250 1
192.168.14.10 255.255.255.255 192.168.254.250 1
91.221.67.141 255.255.255.255 84.52.127.65 1
0.0.0.0 0.0.0.0 80.246.254.145 261
192.168.14.120 255.255.255.255 192.168.254.250 1
192.168.14.121 255.255.255.255 192.168.254.250 1
192.168.14.122 255.255.255.255 192.168.254.250 1