Dinstar DWG2000 inbound calls issue

[avelazquez]

Hi all,

I have a Dinstar DWG2000 which I barely configured as a SIP Trunk and not as a Gateway.
I'm able to get outbound but I cannot make inbound calls to be transfered to the 3CX v15.5.

I'm having a hard time finding good documentation for the v15.5 integration.

Allow Call and Auto Call on the Tel->IP Operation is selected. I dont get the IVR, it just goes to the Voicemail on the GSM SIM.

Is there someone could share some configuration examples?

Thanks in advance

 

[cobaltit]

Probably going to have to go to Dinstar support since this is not a 3CX supported device

 

[Amir Ansari]

hello brothers i have dinstart dag1000 4O and i wanna configure it with 3cx v15 can any one help me how to configure sip trunk with 3cx

 

[cobaltit]

http://www.dinstar.com/Submit-a-ticket

 

[Amir Ansari]

bro do you the steps to configure dinstar dag 1000 4O

 

[eddv123]

As @cobaltit has said these gateways are not supported with 3CX:
https://www.3cx.com/voip-gateways/

I know of several 3CX users that recommend these however and have got them working with 3CX, such as @jimbo59 however I personally would recommend Patton as a supported gateway brand.

With that being said they do not offer a GSM variant, the only supported brand who do are beroNet.