Error, application is not present!

[grnerd]

I apologize if I am asking a rudimentary question, but I have done some searches here and have not found success.

I am putting together my first 3CX system to give it a test drive for to replace our aging fonality system. I have some spare Polycom phones, and am trying to get them registered with the 3CX server.

I have created an option 66 entry in out DHCP server that points to the 3CX server http://172.16.2.40:5000/provisioning/b6obm03lfu

I reset the phone to factory. The REV listed when I press about is 4.1.1.0232

I have created and extension to use the Polycom SPIP550 (4.x.x)

When the phone boots, it says "Error, application is not present!"

I have downloaded the Polycom 4.1.1 Zip file, but I am not sure where to extract it to. The way I read it in some of the posts here, the contents should go into C:\ProgramData\3CX\Data\Http\Interface\provisioning\b6obm03lfu, but that seems messy to me. If I try that, the phone says ....2345-125001-001.sip.ld is not compatible...

THat makes me think it is the right folder, but the firmware is wrong or something.

Can anyone help me? I really am excited to get this system up and tested!

 

[grnerd]

I figured it out! In all of the documentation I read, it never mentioned that you need to download the Polycom® Upgrader 4.0.0 Utility and extract those files into the provisioning directory as well!

 

[netswork]

I am having a very similar issue. What was the exact polycom upgrade you copied? The one I see available on polycoms site is 4.4.0B.

Also are you using any BLF's? Had any trouble with the phone locking up?

Thanks!

 

[grnerd]

So this was back in August when I originally discovered it while building a test 3CX installation locally. Now it is Mid November, and I am building the Production 3CX on a hosted server, and I got stuck in the same place. I did a search to figure out why the other phones are not provisioning, and I came across this old post where I had already figured out the answer.... My brain is getting old...

I will let you know if it works

 

[netswork]

Make sure you are using option 66 in dhcp for the provisioning URL. Have bootROM 4.4.0 upgrader in the provisioning folder. Also use 4.0.7 split firmware...its solid.

 

[grnerd]

That was it. I actually just zipped up that whole provisioning file from my text and extracted it to my production...