Hello,
xxxx.3cx.cloud - Phone company "Bell" (line provider) - Grandstream HT841 - Yealink phone provisioned (two computers with 3CX software installed and configured)
My voip phones and grandstream are on subnet 10.10.30.x and my computers are on subnet 10.10.60.x
I can access the grandstream webpanel at 10.10.30.100 from the computers on subnet 10.10.60.x
In the xxxx.3cx.cloud web panel the phone, trunk and SPC are all green. Call handling is green. When I do a trunk analysis all the checkmarks are green.
When I dial an outbound number I can hear the yealink voip phone ringing, a softphone appears on xxxx.3cx.cloud website. However the receiving phone never rings. If I call the yealink it doesn't ring. So outboud and inbound calls are blocked somewhere and I can't figure out where that is happening.
The call log said "There was no user or outbound rule found for the number 416894xxxx that Ext.24610 dialed."
I do have an outbound rule setup. I need to be able to call any outbound number. And receive calls.
My business phone number is 1-416-757-xxxx
The number I am calling to test it is 1-416-894-xxxx
Does anyone know what is going wrong?
Thanks!
xxxx.3cx.cloud - Phone company "Bell" (line provider) - Grandstream HT841 - Yealink phone provisioned (two computers with 3CX software installed and configured)
My voip phones and grandstream are on subnet 10.10.30.x and my computers are on subnet 10.10.60.x
I can access the grandstream webpanel at 10.10.30.100 from the computers on subnet 10.10.60.x
In the xxxx.3cx.cloud web panel the phone, trunk and SPC are all green. Call handling is green. When I do a trunk analysis all the checkmarks are green.
When I dial an outbound number I can hear the yealink voip phone ringing, a softphone appears on xxxx.3cx.cloud website. However the receiving phone never rings. If I call the yealink it doesn't ring. So outboud and inbound calls are blocked somewhere and I can't figure out where that is happening.
The call log said "There was no user or outbound rule found for the number 416894xxxx that Ext.24610 dialed."
I do have an outbound rule setup. I need to be able to call any outbound number. And receive calls.
My business phone number is 1-416-757-xxxx
The number I am calling to test it is 1-416-894-xxxx
Does anyone know what is going wrong?
Thanks!
