- Joined
- Jul 15, 2014
- Messages
- 3
- Reaction score
- 0
Hello!
We have a strange problem that I can't seem to solve. It appeared all the sudden, without any changes that I know of.
We have an incoming route that looks like this:
1.Ring Group 80 - Ring All (20 sec)
No answer, forward to>
2.Ring Group 85 - Busy (20 sec)
No answer, forward to>
3.Send to voicemail
The Ring Group - Busy contains two extensions put as Out of office and set to forward to our mobile phones.
This has worked flawlessly before. After our office phones stop ringing, our mobile phones started ringing.
Now, it jumps straight from ringing our office phones to voicemail.
I have spoken with our SIP provider, and they can't find any problem on their end. I've also run the 3cx firewall checker and it's all green. We have an NFR license with 4 lines.
Oh, if we dial the ring Ring Group - Busy extension from the inside, it works. Both our mobile phones ring as they should.
It's only when you call from the outside that it fails.
From the logs:
Call or Registration to 0735046xxx@(Ln.10000@Teletek - 3CX 12) has failed. [ V4 212.3.x.xxx:5060 UDP target domain=unspecified mFlowKey=976 ] replied: 480 Temporarily Unavailable; from IP:212.3.x.xxx:5060
Call or Registration to 0704864xxx@(Ln.10000@Teletek - 3CX 12) has failed. [ V4 212.3.x.xxx:5060 UDP target domain=unspecified mFlowKey=976 ] replied: 480 Temporarily Unavailable; from IP:212.3.x.xxx:5060
and
15-jul-2014 10:00:51.987 Leg L:2.8[Line:10000>>0735046xxx] is terminated: Cause: 480 Temporarily Unavailable/INVITE from 212.3.x.xxx:5060
15-jul-2014 10:00:51.987 L:2.1[Line:10000<<0735046xxx] failed to reach RingAll:85, reason Temporarily Unavailable
15-jul-2014 10:00:51.987 Call to T:RingAll:85@[Dev:sip:[email protected]:5060] from L:2.1[Line:10000<<0735046xxx] failed, cause: Cause: 480 Temporarily Unavailable/INVITE from 212.3.x.xxx:5060
15-jul-2014 10:00:51.987 [CM503003]: Call(C:2): Call to <sip:[email protected]:5060> has failed; Cause: 480 Temporarily Unavailable/INVITE from 212.3.x.xxx:5060
Please help :-/ Is there a way to get further info about this error? Verbose mode doesn't give me any additional errors really, as far as I can see. But if you need it, I can print it out.
Best regards
Daniel
We have a strange problem that I can't seem to solve. It appeared all the sudden, without any changes that I know of.
We have an incoming route that looks like this:
1.Ring Group 80 - Ring All (20 sec)
No answer, forward to>
2.Ring Group 85 - Busy (20 sec)
No answer, forward to>
3.Send to voicemail
The Ring Group - Busy contains two extensions put as Out of office and set to forward to our mobile phones.
This has worked flawlessly before. After our office phones stop ringing, our mobile phones started ringing.
Now, it jumps straight from ringing our office phones to voicemail.
I have spoken with our SIP provider, and they can't find any problem on their end. I've also run the 3cx firewall checker and it's all green. We have an NFR license with 4 lines.
Oh, if we dial the ring Ring Group - Busy extension from the inside, it works. Both our mobile phones ring as they should.
It's only when you call from the outside that it fails.
From the logs:
Call or Registration to 0735046xxx@(Ln.10000@Teletek - 3CX 12) has failed. [ V4 212.3.x.xxx:5060 UDP target domain=unspecified mFlowKey=976 ] replied: 480 Temporarily Unavailable; from IP:212.3.x.xxx:5060
Call or Registration to 0704864xxx@(Ln.10000@Teletek - 3CX 12) has failed. [ V4 212.3.x.xxx:5060 UDP target domain=unspecified mFlowKey=976 ] replied: 480 Temporarily Unavailable; from IP:212.3.x.xxx:5060
and
15-jul-2014 10:00:51.987 Leg L:2.8[Line:10000>>0735046xxx] is terminated: Cause: 480 Temporarily Unavailable/INVITE from 212.3.x.xxx:5060
15-jul-2014 10:00:51.987 L:2.1[Line:10000<<0735046xxx] failed to reach RingAll:85, reason Temporarily Unavailable
15-jul-2014 10:00:51.987 Call to T:RingAll:85@[Dev:sip:[email protected]:5060] from L:2.1[Line:10000<<0735046xxx] failed, cause: Cause: 480 Temporarily Unavailable/INVITE from 212.3.x.xxx:5060
15-jul-2014 10:00:51.987 [CM503003]: Call(C:2): Call to <sip:[email protected]:5060> has failed; Cause: 480 Temporarily Unavailable/INVITE from 212.3.x.xxx:5060
Please help :-/ Is there a way to get further info about this error? Verbose mode doesn't give me any additional errors really, as far as I can see. But if you need it, I can print it out.
Best regards
Daniel