Generic SIP trunk configuration problem password lenght

[mic.max]

I configure a SIP trunk for voip service but unfortunately 3cx allow password leght 50 char max, i've a password of 64 char lenght and i can not change password. There is a work around to solve this problem?

thanks

 

[YiannisH_3CX]

Unfortunately this is hard coded into the PBX so i do not see a way around this.
What do you mean by you cannot change password? Is the password defined by the provider?

 

[mic.max]

Thank's for reply!

Yes password is defined from provider and cannot be changed by user !

there are probability then 3CX increase a password field lenght ?

 

[YiannisH_3CX]

You can raise this as a feature request in our ideas section and if it gets enough votes it might get implemented
http://www.3cx.com/forums/3cx-ideas-f57.html

For now i would recommend contacting your provider and ask them if they can provide you with a smaller password. I believe 50 characters long password is secure enough.

 

[mic.max]

You can raise this as a feature request in our ideas section and if it gets enough votes it might get implemented
http://www.3cx.com/forums/3cx-ideas-f57.html

For now i would recommend contacting your provider and ask them if they can provide you with a smaller password. I believe 50 characters long password is secure enough.

Thank you YiannisH_3CX, unfortunately SIP provider provide password with lenght 64 char, is not possible to have password too short!

I open request in http://www.3cx.com/forums/3cx-ideas-f57.html !