Generic SIP Trunk

[2site]

I'm trying to transfer the SIP Trunk settings from my old Asterisk Server to 3CX, the Trunk status is Registered, but I cannot make outgoing calls.. Please help me to import the settings correctly. Below I give the configuration with my Asterisk.
[trunk-supervoip]
type=registration
transport=transport-udp-nat
outbound_auth=trunk-supervoip-auth
server_uri=sip:sip.supervoip.pl:5060
client_uri=sip:[email protected]:5060
contact_user=XXXXXXX
retry_interval=60
forbidden_retry_interval=600
expiration=3600
line=yes
outbound_proxy=sip:sip.supervoip.pl
endpoint=trunk-supervoip
[trunk-supervoip]
type=endpoint
transport=transport-udp-nat
context=from-supervoip
disallow=all
allow=g722,iLBC,GSM
aors=trunk-supervoip
outbound_auth=trunk-supervoip-auth
from_user=XXXXXXXX
from_domain=sip.supervoip.pl
message_context=sms-in
[trunk-supervoip]
type=aor
contact=sip:sip.supervoip.pl:5060
outbound_proxy=sip:sip.supervoip.pl
[trunk-supervoip]
type=identify
endpoint=trunk-supervoip
match=sip.supervoip.pl
[trunk-supervoip-auth]
type=auth
auth_type=userpass
username=XXXXXXXX
password=YYYYYYYY

 

[2site]

figured it out. My provider suggested to me. It was necessary to add the value From : User Part
Now works fine.
Additional question. 3CX server can receive/send SMS via SIP protocol? I see that the templates from other providers indicate the ability to use SMS transmission only through the API.

 

[YiannisH_3CX]

Additional question. 3CX server can receive/send SMS via SIP protocol? I see that the templates from other providers indicate the ability to use SMS transmission only through the API.

No this is not possible.

 

[bbhworlduae]

Hi Everyone.
I bought Grandstream HT812 device to route my Business Landline calls to my 3cx extension. But Its configured to make extension phones only. This means I can use that device as an extension phone for my 3cx but the Landline to 3cx configuration is not working. Can you suggest me the configurations?

 

[SweetAction]

Hi Everyone.
I bought Grandstream HT812 device to route my Business Landline calls to my 3cx extension. But Its configured to make extension phones only. This means I can use that device as an extension phone for my 3cx but the Landline to 3cx configuration is not working. Can you suggest me the configurations?

You need a FXO Gateway, not an FXS device
Read: https://www.3cx.com/pbx/fxs-fxo/
Support FXO devices: https://www.3cx.com/voip-gateways/

 

[bbhworlduae]

You need a FXO Gateway, not an FXS device
Read: https://www.3cx.com/pbx/fxs-fxo/
Support FXO devices: https://www.3cx.com/voip-gateways/

Thanks. I bought FXS Device now.