Hard Phone w/vpn

Status
Not open for further replies.

donbru01

Premier Customer
Joined
Nov 30, 2011
Messages
141
Reaction score
0
Anyone know if exist SIP Hard Phone with inbuild VPN Client IPSEC ?
No Open VPN

We have try Model VideoPhone Cisco , and work fine with CUCM ( SCCP) on VPN IPSEC , but it is difficult convert this phone into SIP PHONE !!

Thanx
Bruno
 
The majority of users would probably be running a set, (or more likely sets), through a router that supports VPN, letting it handle the tunnel . Putting a VPN client in a SIP set will probably be rare or very expensive.

Even for a "one of" location, you may find it more economical to use a VPN capable router, along with a "run of the mill" VoIP phone.
 
Yes we use this topology for normal connection , we have about 750 Site connected to headquarter with ASA 500 , my request is for special project where i can't use ASA .
I must connected Hard-Phone inside a LAN is not our property , without use other device .....
 
The Cisco SPA525G or Cisco SPA525G2 can be used in a virtual private network
(VPN) to allow users secure access to the office phone network from remote
locations or to connect the Internet and use VPN to access the company phone
network. This feature works on the Cisco SPA525G or Cisco SPA525G2 using
either SIP or SPCP.
The phone works with the Cisco AnyConnect VPN client and the following VPN
devices:
• Cisco 500 Series Secure Router
• Cisco 5500 Series Adaptive Security Appliance
• Cisco Unified Communications 520 Series
You must configure the SSL VPN device to ensure proper routing of voice data by
using VLAN and QoS at the end of the SSL VPN server. The following restrictions
apply:
• HTTP proxy is not supported.
• SSL client certificate verification is not supported.
• CDP and VLAN tagging and QoS for the voice and PC port are not
supported on the SSL VPN tunnel.
 
Status
Not open for further replies.