Having trouble with SMS via VoIP.ms

[wwdotcomputers]

I am having trouble periodically sending SMS out. Inbound works fine, and it is a periodic problem. I have tried redoing the BEARER TOKEN. The logs show that there is an authentication error. VoIP.ms says it is on 3CX side. I used the default VoIP.ms template when I set up the SIP trunk. I think this just started happening in v20.

 

[K7oR0x]

I've been having this same issue for a month. None of the configuration guides seem to address the issue. Appears to occur more frequently with other users.

 

[YiannisH_3CX]

Do you see an error in the Event Log of the PBX ? If so what does it say exactly?

 

[K7oR0x]

Severity	Warning
Event ID	30030
Date	10/29/2026 11:52 AM
Details	Failed to send message(s) to the provider 'generic' from '+125XXXXXXX.generic' to '+125YYYYYYY'. Exception: { "data": { "event_type": "message.finalized", "payload": { "id": "51008820261029125233", "record_type": "message", "to": [ { "status": "delivery_failed" } ], "errors": [ "missing_credentials" ] } } }

 

[YiannisH_3CX]

Thank you. We will look into it with the provider to get to the bottom of this

 

[renome]

Thank you. We will look into it with the provider to get to the bottom of this

Hi Yiannis, we're having the same issue. Messaging works fine on the SIP trunk provider (voip.ms) however, 3CX errors out as follows. Can you please provide a solution?

Severity WarningEvent ID 30030Details Failed to send message(s) to the provider 'generic' from 'generic' to ''. Exception: { "data": { "event_type": "message.finalized", "payload": { "id": "123", "record_type": "message", "to": [ { "status": "delivery_failed" } ], "errors": [ "missing_credentials" ] } } }