Huge amount of Log entries generated since V6

[justin]

I upgraded from V5.1 to V6.0.612.0 a few days ago. 5.1 worked great no major issues but since upgrading to 6 my error log contains a HEAP of errors that are appearing every 2 secs.
Initially where it said From: "MakeCall" it was alternating between Ext. 80, 82 and 85 (80 - 85 are digital receptionists) so I thought that maybe something went funny in the upgrade so I deleted all the receptionists in the hope that it would dissappear but now get the following:

00:08:48.524 AuthMgr:nAuthFailure [CM102001]: Authentication failed for SipReq: REGISTER 127.0.0.1:5060 tid=2c099805817c741f cseq=REGISTER [email protected]:40600 / 2 from(wire); Reason: Credentials don't match, check that authorization-ID and password match the ones in extension settings
00:08:48.223 printDetailedInfo [CM502001]: Source info: From: "MakeCall"[sip:[email protected]:5060];tag=1e11c433; To: "MakeCall"[sip:[email protected]:5060]
00:08:48.223 evt::CheckAuth::not_handled [CM302002]: Authentication failed due to unidentified source of: SipReq: REGISTER 127.0.0.1:5060 tid=2c099805817c741f cseq=REGISTER [email protected]:40600 / 2 from(wire)
00:08:47.525 AuthMgr:nAuthFailure [CM102001]: Authentication failed for SipReq: REGISTER 127.0.0.1:5060 tid=e7204c37da64e80c cseq=REGISTER [email protected]:40600 / 2 from(wire); Reason: Credentials don't match, check that authorization-ID and password match the ones in extension settings
00:08:47.224 printDetailedInfo [CM502001]: Source info: From: "MakeCall"[sip:[email protected]:5060];tag=f54dfd4e; To: "MakeCall"[sip:[email protected]:5060]
00:08:47.224 evt::CheckAuth::not_handled [CM302002]: Authentication failed due to unidentified source of: SipReq: REGISTER 127.0.0.1:5060 tid=e7204c37da64e80c cseq=REGISTER [email protected]:40600 / 2 from(wire)
00:08:46.388 AuthMgr:nAuthFailure [CM102001]: Authentication failed for SipReq: REGISTER 127.0.0.1:5060 tid=785deb1ff92bc46a cseq=REGISTER [email protected]:40600 / 2 from(wire); Reason: Credentials don't match, check that authorization-ID and password match the ones in extension settings
00:08:46.088 printDetailedInfo [CM502001]: Source info: From: "MakeCall"[sip:[email protected]:5060];tag=a61da429; To: "MakeCall"[sip:[email protected]:5060]
00:08:46.088 evt::CheckAuth::not_handled [CM302002]: Authentication failed due to unidentified source of: SipReq: REGISTER 127.0.0.1:5060 tid=785deb1ff92bc46a cseq=REGISTER [email protected]:40600 / 2 from(wire)
00:08:45.383 AuthMgr:nAuthFailure [CM102001]: Authentication failed for SipReq: REGISTER 127.0.0.1:5060 tid=0e4397713a2e131a cseq=REGISTER [email protected]:40600 / 2 from(wire); Reason: Credentials don't match, check that authorization-ID and password match the ones in extension settings
00:08:45.083 printDetailedInfo [CM502001]: Source info: From: "MakeCall"[sip:[email protected]:5060];tag=3040a256; To: "MakeCall"[sip:[email protected]:5060]
00:08:45.083 evt::CheckAuth::not_handled [CM302002]: Authentication failed due to unidentified source of: SipReq: REGISTER 127.0.0.1:5060 tid=0e4397713a2e131a cseq=REGISTER [email protected]:40600 / 2 from(wire)
00:08:44.383 AuthMgr:nAuthFailure [CM102001]: Authentication failed for SipReq: REGISTER 127.0.0.1:5060 tid=fc4fa40c0a18f179 cseq=REGISTER [email protected]:40600 / 2 from(wire); Reason: Credentials don't match, check that authorization-ID and password match the ones in extension settings

 

[Henk]

Re: Huge amount of errors generated since V6

Did you restarted the server after the upgrade?

H.

 

[alsoft]

Re: Huge amount of errors generated since V6

I solved major issues with a fresh installation of 3CX 6. Uninstall 3CX, clean up your registry, install again.

 

[justin]

Re: Huge amount of errors generated since V6

Well I couldn't upgrade actually it was giving a lot of problems, so I actually did a clean uninstall and reinstall deleting all configuration settings etc. after backing up, then once V6 was up I ran a restore.

 

[Henk]

Re: Huge amount of errors generated since V6

You must restart after license activation, that made my errors disappear.

 

[justin]

Re: Huge amount of errors generated since V6

You must restart after license activation, that made my errors disappear.

Rebooting fixed it

Seems kinda stupid to have to do that. Maybe they should implement an internal restart of the server when a licence is updated :lol:

 

[Henk]

Re: Huge amount of errors generated since V6

A well, you cannot have it all really .

H.