I really need help with the SPA3102

[dete]

My 3cx System
3CX3.1.2434.0

My device
SPA3102 with 5.7 fimeware

My Log
09:51:19.500 MediaServerReporting::RTPReceiver [MS105000] Call(64) Ln:10000@Linea 1: No RTP packets were received on 00000078@:remoteAddr=192.168.0.60:16394,extAddr=0.0.0.0:0,localAddr=192.168.0.131:7228
09:51:19.500 MediaServerReporting::RTPReceiver [MS105000] Call(64) Ext.100: No RTP packets were received on 00000077@:remoteAddr=192.168.0.131:7000,extAddr=0.0.0.0:0,localAddr=192.168.0.131:7226
09:51:19.500 StratLink:nHangUp [CM104001] Call(64): Ln:10000@Linea 1 hung up call; cause: BYE; from IP:192.168.0.60
09:51:19.187 CallLegImpl:nConnected [CM103001] Call(64): Created audio channel for Ln:10000@Linea 1 (192.168.0.60:16394) with Media Server (192.168.0.131:7228)
09:51:19.187 StratInOut:nConnected [CM104005] Call(64): Setup completed for call from Ext.100 to Ln:10000@Linea 1
09:51:19.187 CallLegImpl:nConnected [CM103001] Call(64): Created audio channel for Ext.100 (192.168.0.131:7000) with Media Server (192.168.0.131:7226)
09:51:17.187 CallConf:nProvisional [CM103003] Call(64): Ln:10000@Linea 1 is ringing
09:51:17.093 CallConf:nIncoming [CM103002] Call(64): Incoming call from 100 (Ext.100) to sip:0685349220@Dekora

My configuration SPA3102
VoIP-To-PSTN Gateway Enable: yes
oIP Caller Auth Method: none
VoIP PIN Max Retry:
One Stage Dialing: yes
Line 1 VoIP Caller DP: none
VoIP Caller Default DP: none
Line 1 Fallback DP: none

My conf 3cx gateway

Gateway Hostname or IP = 192.168.0.60
Gateway Port (default is 5060) = 5060
Use registration's 'Contact' field host/port instead host/port specified in configuration = NO
Require (optionally: authorized) registration for: Nothing (doesn't require registration at all) = Both in-out calls


Supports Re-Invite = YES
Supports 'Replaces' header = NO

'To.user' field = YES
'Request-Line-URI' field = YES
'RemotePartyID;party=called' field = YES

Gateway is external = NO
PBX delivers audio = NO
Use IP in 'Contact' to recognize source = NO
IP Range = EMPY
Caller-ID is in 'user' part of (one of following): = 'From' field
'To' field

Called-Number (for inbound calls) is in: = 'To.user' field

Client X-lite 3.0

Location = Spain


My problem

I can recibe calls over the linksys line, but I can't make out calls by the linksys line, for the hung up error. please can anybody help me?

Thank for your help

 

[dete]

Finally Solved

PSTN Disconnect Detection
Detect CPC: no
Detect Polarity Reversal: no
Detect PSTN Long Silence: no
Detect VoIP Long Silence: no

Detect Disconnect Tone: yes