internal calls won't work

[shark95763]

Hi,

I got 2 ext setup 100 and 101

look at the log: on both softphones i get 403 forbidden

23:35:40.468 CallConf::Rejected [CM103005] Call(23) is rejected: This line disallows incoming calls
23:35:40.468 Endpoint::findSource [CM010001] Line configuration does not allow identification of the source of this call. Check Advanced Options for Gateways and Providers and match a field to a correct value from the following: Contact IP: '192.168.2.1'; From: '101'; To: '100'; Rline: '100'; Contact: '101'
23:35:33.037 CallConf::Rejected [CM103005] Call(22) is rejected: This line disallows incoming calls
23:35:33.037 Endpoint::findSource [CM010001] Line configuration does not allow identification of the source of this call. Check Advanced Options for Gateways and Providers and match a field to a correct value from the following: Contact IP: '192.168.2.101'; From: '100'; To: '101'; Rline: '101'; Contact: '100'
23:35:08.001 CallConf::Rejected [CM103005] Call(21) is rejected: This line disallows incoming calls
23:35:08.001 Endpoint::findSource [CM010001] Line configuration does not allow identification of the source of this call. Check Advanced Options for Gateways and Providers and match a field to a correct value from the following: Contact IP: '192.168.2.101'; From: '100'; To: '101'; Rline: '101'; Contact: '100'

at the moment i got no lines setup.... hmmm

 

[gbarnes]

Softphones

What softphones are you using?

Do you have STUN enabled on your softphone, if you are on an internal network then DO NOT USE STUN, as it will give your external IP address.

See if that works, also, are your extensions registered (ie green icon on status page)?

Hope you get it soon..

Graeme.