I have version 6 installed and have changed the ip address of the gateway, in fact even deleted the gateway with the old IP address and yet it is still showing the original one I have put in, not the new one that I have entered
when I go in to edit default gateway it shows 192.168.3.201 (and this is the only gateway) but in the log it shows
[CM102001]: Authentication failed for SipReq: REGISTER 192.168.4.200 tid=cbdaeaed183c26b08 cseq=REGISTER [email protected]:5060 / 30055 from(wire); Reason: Credentials don't match, check that authorization-ID and password match the ones in extension settings
192.168.4.201 is the address of the gateway (which should also work )
also unsure how to fix the Credentials issue, as we have not entered any.
ready to pull hair out !!!
when I go in to edit default gateway it shows 192.168.3.201 (and this is the only gateway) but in the log it shows
[CM102001]: Authentication failed for SipReq: REGISTER 192.168.4.200 tid=cbdaeaed183c26b08 cseq=REGISTER [email protected]:5060 / 30055 from(wire); Reason: Credentials don't match, check that authorization-ID and password match the ones in extension settings
192.168.4.201 is the address of the gateway (which should also work )
also unsure how to fix the Credentials issue, as we have not entered any.
ready to pull hair out !!!
