Attended Transfer Greyed out

[Rich Hopkins]

I'm having an issue with attended transfers on our T42s handsets and 3CX PWA or Chrome webclient software.
Users pick up the T42s to answer the call, speak and try to do an attended transfer via the 3CX PWA or Chrome webclient but the option is greyed out.

I've been through the Admin side of 3CX and Yealink WebUI but changing the option for transfer does not make a difference:




I'm out of ideas and this is becoming a real issue for my users when transferrring calls. Any ideas?

 

[Alejandro_3CX]

Hi @Rich Hopkins in the pwa --- if you click the dialer ---- are you selecting the Yealink T42s ?



The user extension under the blf tab can you check that at least the blf are set as line key.

is this phone in the same pbx LAN or remotely connected via 3cx sbc?

 

[Rich Hopkins]

Yealink is selected in the dialer.

BLF's have 9 selected


Same LAN for PBX and all phones.

 

[Alejandro_3CX]

Could you please check the following:

• Firmware on Yealink T42S must be 66.86.0.180
• Phone must be using default template and not a custom one.
• If the phone and the pwa are in the same pbx LAN, make sure the split DNS is configured, more info here
• Make sure you are logged in the web client or PWA using the FQDN via HTTPS.

 

[Rich Hopkins]

Thanks for your reply, it is very much appreciated.

• Firmware on Yealink T42S is 66.86.0.180
• Using a default template
• Using FQDN via HTTPS
• Will check split brain DNS

It's odd, as this is only affecting new users where the T42s has been factory reset by holding the 'OK' button down.
Previous users that have been working here a while can do attended transfers ok.

 

[Alejandro_3CX]

You can try to remove the phone from the user extension, apply the changes and perform a factory reset on the phone. Once done, proceed and add it back in the user extension and provisioning it. Let me know the result.