Hi
Have 3cx working fine with pennytel VSP and using 3cx softphone
was wondering
Is it possible to connect to 3cx from a sip phone client on the iphone connected wirelessly to the same network
have tried using siphon on the iphone setting server to 3cx address 192.168.2.100 as well as proxy server to the same address
when i run softphone application it says connected but when i dial 3cx softphone rings no matter what number i dial
server activity log is as follows
23:39:11.937 [CM504008]: Fax Service: registered as sip:[email protected]:5060 with contact sip:[email protected]:5100;user=phone
23:36:56.546 [CM503008]: Call(8): Call is terminated
23:36:52.390 [CM505001]: Ext.1000: Device info: Device Not Identified: User Agent not matched; Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [3CXVoipPhone 3.0.5407.0] Transport: [sip:192.168.2.100:5060]
23:36:52.390 [CM503002]: Call(8): Alerting sip:[email protected]:3233;rinstance=783ac71eefc6ef94
23:36:51.875 [CM503004]: Call(8): Calling: Ext:Ext.1000@[Dev:sip:[email protected]:3233;rinstance=783ac71eefc6ef94]
23:36:51.875 [CM503010]: Making route(s) to <sip:[email protected]:5060>
23:36:51.859 [CM505003]: Provider:[Pennytel] Device info: Device Not Identified: User Agent not matched; Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [Siphon PjSip v1.0.1/darwin] Transport: [sip:192.168.2.100:5060]
23:36:51.843 [CM503001]: Call(8): Incoming call from 8889194183@(Ln.10000@Pennytel) to <sip:[email protected]:5060>
any suggestions on how to get this working would be appreciated if this is possible or am i wasting my time
thanks
Have 3cx working fine with pennytel VSP and using 3cx softphone
was wondering
Is it possible to connect to 3cx from a sip phone client on the iphone connected wirelessly to the same network
have tried using siphon on the iphone setting server to 3cx address 192.168.2.100 as well as proxy server to the same address
when i run softphone application it says connected but when i dial 3cx softphone rings no matter what number i dial
server activity log is as follows
23:39:11.937 [CM504008]: Fax Service: registered as sip:[email protected]:5060 with contact sip:[email protected]:5100;user=phone
23:36:56.546 [CM503008]: Call(8): Call is terminated
23:36:52.390 [CM505001]: Ext.1000: Device info: Device Not Identified: User Agent not matched; Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [3CXVoipPhone 3.0.5407.0] Transport: [sip:192.168.2.100:5060]
23:36:52.390 [CM503002]: Call(8): Alerting sip:[email protected]:3233;rinstance=783ac71eefc6ef94
23:36:51.875 [CM503004]: Call(8): Calling: Ext:Ext.1000@[Dev:sip:[email protected]:3233;rinstance=783ac71eefc6ef94]
23:36:51.875 [CM503010]: Making route(s) to <sip:[email protected]:5060>
23:36:51.859 [CM505003]: Provider:[Pennytel] Device info: Device Not Identified: User Agent not matched; Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [Siphon PjSip v1.0.1/darwin] Transport: [sip:192.168.2.100:5060]
23:36:51.843 [CM503001]: Call(8): Incoming call from 8889194183@(Ln.10000@Pennytel) to <sip:[email protected]:5060>
any suggestions on how to get this working would be appreciated if this is possible or am i wasting my time
thanks
evice Not Identified: User Agent not matched, which I interpret as... it isn't going to work the way you currently have it configured. Does the phone say it is registered on the handset? Can you query what IP the handset thinks it has? WiFi phones will work on the 3CX, I've got 3 of them working, if the iPhone application is standard SIP then there is no reason that it won't work.
