Lansweeper x SBC HA

[JLSeagull]

Hello 3CX Team and Members.

I've implemented SBC HA in my LAN. It's working fine, but I realized that Lansweeper is not detecting 3CX SBC 2's IP anymore, instead It's detecting the SCB HA's Floating IP.

This is how my SCB HA It's configured:

SCB HA's Floating IP => 192.168.0.93
SBC 1 => 192.168.0.4
SBC 2 => 192.168.0.64

Before of the implementation, Lansweeper was detecting SBC 2's IP correctly (IP 192.168.0.64). Now It's detecting the SBC 2's machine, but with the HA Floating IP (192.168.0.93).

I can see the IP 192.168.0.64 in the SBC 2, but on Lansweeper its MAC ADDRESS is binded to the IP 192.168.0.93.

Even scanning again and again and again, Lansweeper It's not detecting the correct SBC 2's IP.

This is the CRM_MON's output;