Linksys SPA400??

[kaskiland]

I have in the company the Linksys SPA400 used with Asterisk

We bought this new software and license (3CX), and I would like to know how to configure the PBX to route calls to mobile in SPA400

 

[mfm]

Hi,

You can use the forwarding rules on that specific extension to either send the call to your mobile, or to ring both at the same time.
http://www.3cx.com/blog/voip-howto/forwarding-rules-v9/

 

[leejor]

Here is a link to a previous post about the SPA400... http://www.3cx.com/forums/someone-has-tested-spa400-on-3cx-995-15.html

 

[kaskiland]

I want to set is that when a person calls to a mobile (6xxxxxx) that call routed by PBX to Linksys SPA400 phones calls to go out there

 

[abc123]

Set an outbound rule with a ddi mask starting with 6 (or the full prefix if it helps) and the number length of the mobile number and set it to go out through the spa400

Make sure that outbound rule is near or at the top of the list as rules are applied in top down order

 

[kaskiland]

Ok thanks i known this steps

But I want to know is, adding the SPA400 gateway control unit only gives me the option of SPA-3102New, if I put that model worked well in my SPA400?