mediatrix 4404

[danielgc]

Does 3CX support this gateway? If so, is there any step-by-step guide i can follow? I can't get 3CX to work with this gateway. Any help will be appreciated.

Thanxs.
Daniel.

 

[bhavank]

Hello

Please send the detailed manual at [email protected] so that we could guide you in a much better manner.

 

[danielgc]

which manual are you talking about? the Mediatrix gateway manual?

 

[N_G]

We dont support that gateway. See our support section for the list of gateways that we do support.

 

[5qg4]

Hi Nick,

Just to confirmed that 3CX not support all Mediatrix gateways(FXO, BRI and PRI). Is it correct?

 

[RobLloyd]

I just signed up with a company to get those at reseller prices (plus other brands). The sales person there recommended those over some other ones. I won't be ordering that one to demo now.

Glad someone asked about it.

 

[dyntech]

That's too bad they aren't supported. They are great gateways.

 

[voipx2004]

Hello,
I have the same problem, outgoing calls to ISDN line working, incoming calls log error "Authentication failed due to unidentified" and "Unidentified incoming call. Review INVITE and adjust source identification" .

I need urgently Help, is my first installation of this product and Mediatrix 4404 works with Linksys products. INVITE is not in correct format...

LOG:


[CM302001]: Authorization system can not identify source of: SipReq: INVITE 10.10.1.105:5060 tid=a97907933 cseq=INVITE [email protected]:5061 / 451381171 from(wire)


[CM500002]: Unidentified incoming call. Review INVITE and adjust source identification:
INVITE sip:10.10.1.105:5060 SIP/2.0
Via: SIP/2.0/UDP 10.10.1.101:5061;branch=z9hG4bKa97907933
Route: [sip:10.10.1.105:5060;lr]
Contact: [sip:[email protected]:5061]
To: [sip:[email protected]:5060]
From: [sip:[email protected]:5060];tag=a46603cc4e60100
Call-ID: [email protected]
CSeq: 451381171 INVITE
Session-Expires: 3600
Min-SE: 1800
Allow: INVITE, ACK, BYE, CANCEL, REFER, NOTIFY
Supported: timer, replaces
User-Agent: Mediatrix 4404 v1.1.9.85
Content-Length: 0


[CM302002]: Authentication failed due to unidentified source of: SipReq: INVITE 10.10.1.105:5060 tid=462a70cf5 cseq=INVITE [email protected]:5061 / 451381172 from(wire)


[CM500002]: Unidentified incoming call. Review INVITE and adjust source identification:
INVITE sip:10.10.1.105:5060 SIP/2.0
Via: SIP/2.0/UDP 10.10.1.101:5061;branch=z9hG4bK462a70cf5
Route: [sip:10.10.1.105:5060;lr]
Contact: [sip:[email protected]:5061]
To: [sip:[email protected]:5060]
From: [sip:[email protected]:5060];tag=a46603cc4e60100
Call-ID: [email protected]
CSeq: 451381172 INVITE
Session-Expires: 3600
Min-SE: 1800
Allow: INVITE, ACK, BYE, CANCEL, REFER, NOTIFY
Proxy-Authorization: Digest response="07794046999929a9438da2e37392f12c",username="10000",realm="3CXPhoneSystem",nonce="12851763760:12886bd4e1f5db3cbad7c667c9dde95f",algorithm=MD5,uri="sip:10.10.1.105:5060"
Supported: timer, replaces
User-Agent: Mediatrix 4404 v1.1.9.85
Content-Length: 0


[CM102001]: Authentication failed for SipReq: INVITE 10.10.1.105:5060 tid=462a70cf5 cseq=INVITE [email protected]:5061 / 451381172 from(wire); Reason: Credentials don't match, check that authorization-ID and password match the ones in extension settings

 

[archie]

Try to set Source idetification for this gateway to
Contact : host-port = Custom value 10.10.1.101:5061

 

[voipx2004]

Very good!

Problem is solved, many thanks!

I have tried without port number during my tests...

MEDIATRIX 4404 Works with direct MSN to internal numbers.

Best regards.

 

[dyntech]

Archie,

Do you think the same fix would work with a Mediatrix 1204?

I remember getting a very similiar error a while back but gave up trying to get it to work.

 

[archie]

I'm not sure. We've tried to work with 1204 a long-long time ago and were unsuccessful. I recall we had a problem with one-stage dialing, but I don't remember details. After that fault we abandoned attempts to work with it.