Toggle sidebar Toggle sidebar

N95 Nokia WiFI

Status
Not open for further replies.

rorygennaro

Joined
Nov 7, 2007
Messages
11
Reaction score
0
I do not know how configure N95 with 3cx.
My server is 192.168.1.1

Can you hel me?
 
Try this.

Create the extension for N95 in 3cx for example "100" and password: "100"
after that enter the settings in your phone

1. Go to "Tools" and then to "Settings"
2. Go to "Connection"
3. Go to "SIP settings"
4. Add a new default profile
5. enter the following settings:

Profile name: 3cx
Service profile: IETF
Default access point: choose your WLAN access point
Public user name: your extension@ip from your 3cx-server (Example: [email protected])
Use compression: No
Registration: Always on or When needed
Use security: No

Proxy server:

Proxy server address: ip from your 3cx-server (example: 192.168.1.1)
Realm: 3CXPhoneSystem
User name: your extension (example: 100)
Password: the password of your extension
Allow loose routing: Yes
Transport type: UDP
Port: 5060

Registrar server:

Registrar serv. addr. : ip from your 3cx-server (example: 192.168.1.1)
Realm: 3CXPhoneSystem
User name: your extension (example: 100)
Password: the password of your extension
Transport type: UDP
Port: 5060

Now go back to "Connection" and then to "Internet tel. settings"

create a new profile:
Name: 3cx
SIP profiles: 3cx

And then it hopefuly would work..
 
I used this configuration for Nokia E61 and it works,

I think it should work with your mobile too ;-)
 
It should work with all mobiles with WLAN support.

Have tested it on nokia N70, N81, N95, E60, E65, E70, 6500 and 9300i com.)
 
Ok it connect but when I call it also fron intrenal it reply busy end close

In mobile I receive a message call lost
 
What version and build of 3CX are you using?
And what does the server logs say?
 
Ok now run. Thank you.

How I connect with the same N95 in external ?

with the same configutation but with xxxxxx.dyndns.org in IP address, it non register.
 
hi,

I do not think that you will be able to use the N95 as an external extension as i do not believe there is any stun support within the Nokia firmware .

it is possible via a vpn connection and i have tried this and it does work
 
Domain Parameters:
STUN Server Name: stun.3cx.com
STUN server port: 3478
TCP NAT Bind Refresh: 1200
UDP NAT bind refresh: 1200
CRLF Refresh: Off


IAP Parameters:
Select your WiFi IAP
TCP NAT bind refresh: 1200
UDP NAT bind refresh: 28
STUN retransmission: 250

Now on the E65 I've left the VoIP Services section empty as this seems to work for the IAP I use.

I have used it in the past and it seems to work the same with or without

If you do use one, make sure the "Secure Call Preference" is set to prefer non-secure and that Ignoring Domain Part is on under the profile settings.

You can set the priority of the codecs aswell if you wish, if you do, make sure that iLBC is at the top.
 
Thanks for your reply. that is how i have it set up too. Mine does not dont work and i belived i had it wrong...
this is log when i try to make call to remote extenssion which does not ring at all.

14:50:28.218 StratInOut::onHangUp [CM104007] Call(231): Call from Ext.514 to 517 has been terminated by Ext.514; cause: CANCEL; from IP:192.168.1.1
14:50:27.999 CallLegImpl::onConnected [CM103001] Call(230): Created audio channel for Ext.514 (72.77.31.157:9452) with Media Server (192.168.1.103:7450)
14:50:27.624 CallConf::onIncoming [CM103002] Call(263): Incoming call from 514 (Ext.514) to sip:[email protected]:5060
14:50:27.593 CallLegImpl::onConnected [CM103001] Call(229): Created audio channel for Ext.514 (72.77.31.157:9450) with Media Server (192.168.1.103:7448)
14:50:27.108 CallLegImpl::onConnected [CM103001] Call(228): Created audio channel for Ext.514 (192.168.1.102:5004) with Media Server (192.168.1.103:7446)
14:50:26.780 CallConf::onIncoming [CM103002] Call(262): Incoming call from 514 (Ext.514) to sip:[email protected]:5060
14:50:26.358 CallConf::onIncoming [CM103002] Call(261): Incoming call from 514 (Ext.514) to sip:[email protected]:5060
14:50:25.874 CallConf::onIncoming [CM103002] Call(260): Incoming call from 514 (Ext.514) to sip:[email protected]:5060
14:50:25.436 CallConf::onIncoming [CM103002] Call(259): Incoming call from 514 (Ext.514) to sip:[email protected]:5060
14:50:24.999 CallConf::onIncoming [CM103002] Call(258): Incoming call from 514 (Ext.514) to sip:[email protected]:5060
14:50:24.561 CallConf::onIncoming [CM103002] Call(257): Incoming call from 514 (Ext.514) to sip:[email protected]:5060
14:50:24.139 CallConf::onIncoming [CM103002] Call(256): Incoming call from 514 (Ext.514) to sip:[email protected]:5060
14:50:23.702 CallConf::onIncoming [CM103002] Call(255): Incoming call from 514 (Ext.514) to sip:[email protected]:5060
14:50:23.280 CallConf::onIncoming [CM103002] Call(254): Incoming call from 514 (Ext.514) to sip:[email protected]:5060
14:50:22.827 CallConf::onIncoming [CM103002] Call(253): Incoming call from 514 (Ext.514) to sip:[email protected]:5060
14:50:22.452 CallConf::onIncoming [CM103002] Call(252): Incoming call from 514 (Ext.514) to sip:[email protected]:5060
14:50:21.983 CallConf::onIncoming [CM103002] Call(251): Incoming call from 514 (Ext.514) to sip:[email protected]:5060
14:50:21.546 CallConf::onIncoming [CM103002] Call(250): Incoming call from 514 (Ext.514) to sip:[email protected]:5060
14:50:21.108 CallConf::onIncoming [CM103002] Call(249): Incoming call from 514 (Ext.514) to sip:[email protected]:5060
14:50:20.671 CallConf::onIncoming [CM103002] Call(248): Incoming call from 514 (Ext.514) to sip:[email protected]:5060
14:50:20.186 CallConf::onIncoming [CM103002] Call(247): Incoming call from 514 (Ext.514) to sip:[email protected]:5060
14:50:19.749 CallConf::onIncoming [CM103002] Call(246): Incoming call from 514 (Ext.514) to sip:[email protected]:5060
14:50:19.311 CallConf::onIncoming [CM103002] Call(245): Incoming call from 514 (Ext.514) to sip:[email protected]:5060
14:50:18.874 CallConf::onIncoming [CM103002] Call(244): Incoming call from 514 (Ext.514) to sip:[email protected]:5060
14:50:18.546 CallConf::onIncoming [CM103002] Call(243): Incoming call from 514 (Ext.514) to sip:[email protected]:5060
14:50:18.061 CallConf::onIncoming [CM103002] Call(242): Incoming call from 514 (Ext.514) to sip:[email protected]:5060
14:50:17.624 CallConf::onIncoming [CM103002] Call(241): Incoming call from 514 (Ext.514) to sip:[email protected]:5060
14:50:17.186 CallConf::onIncoming [CM103002] Call(240): Incoming call from 514 (Ext.514) to sip:[email protected]:5060
14:50:16.749 CallConf::onIncoming [CM103002] Call(239): Incoming call from 514 (Ext.514) to sip:[email protected]:5060
14:50:16.311 CallConf::onIncoming [CM103002] Call(238): Incoming call from 514 (Ext.514) to sip:[email protected]:5060
14:50:15.843 CallConf::onIncoming [CM103002] Call(237): Incoming call from 514 (Ext.514) to sip:[email protected]:5060
14:50:15.405 CallConf::onIncoming [CM103002] Call(236): Incoming call from 514 (Ext.514) to sip:[email protected]:5060
14:50:14.968 CallConf::onIncoming [CM103002] Call(235): Incoming call from 514 (Ext.514) to sip:[email protected]:5060
14:50:14.530 CallConf::onIncoming [CM103002] Call(234): Incoming call from 514 (Ext.514) to sip:[email protected]:5060
14:50:14.093 CallConf::onIncoming [CM103002] Call(233): Incoming call from 514 (Ext.514) to sip:[email protected]:5060
14:50:13.655 CallConf::onIncoming [CM103002] Call(232): Incoming call from 514 (Ext.514) to sip:[email protected]:5060
14:50:13.218 CallConf::onIncoming [CM103002] Call(231): Incoming call from 514 (Ext.514) to sip:[email protected]:5060
14:50:12.780 CallConf::onIncoming [CM103002] Call(230): Incoming call from 514 (Ext.514) to sip:[email protected]:5060
14:50:12.343 CallConf::onIncoming [CM103002] Call(229): Incoming call from 514 (Ext.514) to sip:[email protected]:5060

When i call from remote extenssion to my local extenssion i its one way audio in this case.
14:52:51.530 MediaServerReporting::RTPReceiver [MS105000] Call(276) Ext.517: No RTP packets were received on 00000221@:remoteAddr=192.168.1.100:16384,extAddr=72.77.31.157:9046,localAddr=0.0.0.0:9046
14:52:51.514 StratLink::onHangUp [CM104001] Call(276): Ext.514 hung up call; cause: BYE; from IP:192.168.1.102
14:52:19.030 CallLegImpl::onConnected [CM103001] Call(276): Created audio channel for Ext.514 (192.168.1.102:5004) with Media Server (192.168.1.103:7042)
14:52:19.030 StratInOut::onConnected [CM104005] Call(276): Setup completed for call from Ext.517 to Ext.514
14:52:19.014 CallLegImpl::onConnected [CM103001] Call(276): Created audio channel for Ext.517 (192.168.1.100:16384) with Media Server (72.77.31.157:9046)
14:52:05.343 CallConf::onProvisional [CM103003] Call(276): Ext.514 is ringing
14:52:05.218 CallConf::onIncoming [CM103002] Call(276): Incoming call from 517 (Ext.517) to sip:[email protected]

i know i'm missing something but not sure what.
 
For the external extencions you must do as follow:

Extencion manage -> others

Extension is External
Bind to Media Server

And now Work :D
 
I wish,

i had it set up as external extenssion before, i did try to bind it to media server and no luck, same thing happend when it was not bind to media server. one way audio still going on.
 
Mori said:
Registrar serv. addr. : ip from your 3cx-server (example: 192.168.1.1)
Realm: 3CXPhoneSystem
User name: your extension (example: 100)
Password: the password of your extension
Transport type: UDP
Port: 5060
Click to expand...

Can you explain me Realm: 3CXPhoneSystem because on my N95 is noted domaine which must I put? IP of the server 3CX?

Thank you for your answer because that made several days that I seek and I do not find!

f1piz
 
i've got E65 and with the nokia software doesn't work

with fring it work very well
 
Thank you for information I will test with this software
best regards,

stephane
 
Hello,

Thank you for your answer.

I tried to make it function with fring and still not solution to date somebody would have it a note of configuration of fring with 3cx?

Thank you in advance for your answers.

Greetings,


Stephane
 
does the fring setup finished ok?
 
yes the setup finish ok But I will remake tests of configuration

stephane
 
Status
Not open for further replies.

Latest Posts

Forum statistics

Threads
112,327
Messages
591,904
Members
165,480
Latest member
Jake_Southern
3CX Logo Footer Copyright © Sitemap Privacy
Top Bottom