OK starting off

[jmorley990]

Ok, i got just a few questions

1, i use windows xp, my home computer, will 3cx run on a regular computer
2.if i were to use this software, where would i get my ip number for the settings
3.how would i plug in a cisco ip phone to use it
4.what is the best provider to use for the service

thanks JM

 

[KerryG]

1. Yes, it runs great on Windows XP Pro
2. It will be the IP address of the machine you are putting it on. Typing ipconfig from a cmd prompt will give you the IP, but it really should be on a static IP and not DHCP.
3. Depends on which Cisco phone and what firmware is on it
4. AT&T, Verizon, PacBell or other landline carries are the best

 

[jmorley990]

we have verizon DSL right now. how would i set the PBX up to work with my verizon account or a IP phone account? like i see call all these IP SIP providers....how does that work with VERIZON.

and what phone is best, or softphone?

 

[KerryG]

You asked what the best is, the best is to use analog phone lines or a PRI. For that you would need a gateway device like a Patton 4114. If you wanted to use a SIP trunk, then its pretty simple if it is a supported one, simply go to the voip trunks, select the provider, and enter your username and password.

What phone is best? What is your budget? I personally really like the Cisco SPA525G but its a little pricey. The Cisco SPA504G is really good for only $133. I do not like using softphones myself while other people do. Its more a matter of personal preference.

 

[jmorley990]

hmm...thanks for all the info.

 

[Ricambi America]

I personally really like the Cisco SPA525G but its a little pricey.

I agree... but they are oooo so sweet! I use the SPA525G on my desk a hundred times a day.

 

[jmorley990]

ok like if i got a Cisco SPA phone, what VOIP provider works with the IP phone? thats what i need to know how to set up with that phone


edit: how do i know how to get the IP phone to work with 3CX and the VOIP provider?
edit: i want the SPA921 1 line IP phone